My Garage
Cart
Make sure this part fits

Ford 9L2Z-19972-B
Discharge Line, Front

2006-2010 Ford 9L2Z19972B

Customer Questions & Expert Answers (9)
Ford 9L2Z-19972-B Discharge Line, Front
  • Part Description
    Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose
  • Base No.
    19972
  • Position
    Front
  • Replaces
    6L2Z-19972-BA, 7L2Z-19972-B
  • Manufacturer
    Ford
Make sure this part fits
$86.28 MSRP: $117.41
You Save: $31.13 (27%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2010 Ford ExplorerEddie Bauer, Limited, XLT8 Cyl 4.6 L GAS
    2006-2010 Mercury MountaineerLuxury, Premier8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 9L2Z-19972-B compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 9L2Z-19972-B fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What are the final steps after installation for the 2007 Ford Explorer? Posted by Customer
    A:
    Evacuate, leak test, and charge the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be ensured during reinstallation of the fittings for the 2008 Ford Explorer? Posted by Customer
    A:
    Ensure to tighten the fittings to 8 Nm (71 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the first step in servicing and repairing the front auxiliary evaporator outlet and inlet line for the 2006 Ford Explorer? Posted by Customer
    A:
    Begin by recovering the refrigerant.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What should be done if equipped with an auxiliary evaporator outlet line for the 2009 Ford Explorer? Posted by Customer
    A:
    Disconnect the auxiliary evaporator outlet line fitting and discard the O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the front portion of the condenser-to-evaporator line for the 2008 Mercury Mountaineer? Posted by Customer
    A:
    Remove the A/C line bracket nut at the dash panel and detach the bracket, tightening it to 6 Nm (53 lb-in) during reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after disconnecting the evaporator core orifice access fitting for the 2006 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the condenser outlet fitting nut and disconnect the fitting, discarding the O-ring seal and tightening the fitting to 8 Nm (71 lb-in) upon reinstallation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the torque specification for tightening the fittings during reinstallation for the 2009 Mercury Mountaineer? Posted by Customer
    A:
    Ensure the fittings are tightened to 8 Nm (71 lb-in).
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    Q:
    What is the next step after removing the spare tire carrier for the 2007 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the two front fitting nuts of the rear auxiliary evaporator line and discard the O-ring seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Discharge Line, Front 9L2Z-19972-B Designed for Proper Fit and Performance

The Ford part 9L2Z-19972-B Discharge Line, Front as a genuine Ford A/C Hose component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 9L2Z-19972-B Discharge Line, Front is used with Ford Explorer vehicles and Mercury Mountaineer models. The original Ford part will bear the manufacturer part number: 9L2Z-19972-B and where it is made at Ford. It has been specifically developed to fit the Front and has the code: 19972.
This component has dimensions of 13.0 x 16.3 x 32.3 inches and its weight is approximately 4.90 Pounds. The part 9L2Z19972B is available in New condition while meeting the standards of the product rating. The Tube Assembly; A/C Refrigerant Hose, Front; A/C Refrigerant Liquid Hose; A/C Hose belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 9L2Z-19972-B can be known as A/C Tube, and it replaces 6L2Z-19972-BA, 7L2Z-19972-B. The inventory reference for this item is SKU: 9L2Z-19972-B. Additional manufacturer-provided details include: Compressor to condenser. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.