Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 7L1Z-19849-A
Expansion Valve, Rear

2007-2017 Ford 7L1Z19849A

Customer Questions & Expert Answers (8)
Ford 7L1Z-19849-A Expansion Valve, Rear
Ford 7L1Z-19849-A Expansion Valve, Rear
Ford 7L1Z-19849-A Expansion Valve, Rear
  • Part Description
    Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Rear
  • Base No.
    19849
  • Position
    Rear
  • Manufacturer
    Ford
Make sure this part fits
$33.40 MSRP: $53.04
You Save: $19.64 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 2009 Ford Expedition Expansion Valve, Rear Diagram for 7L1Z-19849-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 7L1Z-19849-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2017 Ford ExpeditionEL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Platinum6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2007-2017 Lincoln NavigatorL, L Luxury, L Reserve, L Select, L Ultimate6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you verify if 7L1Z-19849-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 7L1Z-19849-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the A/C Expansion Valve for auxiliary climate control on Ford Expedition? Posted by Customer
    A:
    The first step for repairing or servicing the A/C Expansion Valve for auxiliary climate control systems in Expedition and Navigator models involves refrigerant recovery. Start by removing the right-hand quarter trim panel followed by disconnecting the A/C Expansion Valve fitting through the removal of its bolt. The service technician should discard the O-ring seals currently in use at this point. The two A/C Expansion Valve bolts should be removed while also extracting the A/C Expansion Valve before discarding its O-ring seals. The installation process requires executing the reversal of removal steps including new O-ring seal installation and proper addition of clean PAG oil to the refrigerant system. To end the process, you need to evacuate and then perform leak tests followed by system charging.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the A/C Expansion Valve on Lincoln Navigator? Posted by Customer
    A:
    Positioning the Expedition EL or Navigator L on a hoist while setting it to NEUTRAL position is the first step before servicing the A/C expansion valve. First recover the refrigerant before removing and discarding the gasket seals from the auxiliary evaporator outlet and inlet line rear fitting nut. Tighten new gasket seals to 12 Nm (9 lb-ft) upon their installation. The process requires first removing the two bolts securing the A/C expansion valve. Afterward, you can take out the A/C expansion valve and discard the O-ring seals. Use new O-ring seals and gasket seals with correct PAG oil lubrication before installation of the new A/C expansion valve and tighten its bolts to 8 Nm (71 lb-in). Complete the work by evacuating then performing leak tests before charging the refrigerant system.
    Posted by FordPartsDeal Specialist
    Q:
    How to Properly Maintain the A/C Expansion Valve in a Lincoln Navigator? Posted by Customer
    A:
    Service of the A/C expansion valve on the Expedition EL and Navigator L starts by putting the vehicle in neutral gear on a hoist. After refrigerant recovery, you should remove the auxiliary evaporator rear fitting nut and discard the gasket seals before tightening new ones to 12 Nm (9 lb-ft). After removing both bolts that fasten the A/C expansion valve, take the valve out while discarding its O-ring seals and tightening the new ones to 8 Nm (71 lb-in) when putting it back. Follow the uninstallation steps backward to reinstall the system after replacing the needed O-ring and gasket seals and by adding an appropriate amount of clean PAG oil to the refrigerant system. The refrigerant system requires evacuation, then leak testing and charging as the last step.
    Posted by FordPartsDeal Specialist
    Q:
    What are the final steps after reinstallation for the 2008 Ford Expedition? Posted by Customer
    A:
    Evacuate, leak test, and charge the refrigerant system.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Expansion Valve
    Q:
    What should be done with the gasket seals after removing the TXV for the 2009 Ford Expedition? Posted by Customer
    A:
    Discard the gasket seals.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Expansion Valve
    Q:
    What should be done during installation for the 2008 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure, ensuring to install new O-ring seals and lubricate the refrigerant system with the correct amount of clean PAG oil.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Expansion Valve
    Q:
    What should be done during reinstallation for the 2009 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure, ensuring to use new O-ring seals and gasket seals while lubricating the refrigerant system with the correct amount of clean PAG oil.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Expansion Valve
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Expansion Valve, Rear 7L1Z-19849-A Designed for Proper Fit and Performance

The Ford part 7L1Z-19849-A Expansion Valve, Rear as a genuine Ford A/C Expansion Valve component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 7L1Z-19849-A Expansion Valve, Rear is used with Ford Expedition vehicles and Lincoln Navigator models. The original Ford part will bear the manufacturer part number: 7L1Z-19849-A and where it is made at Ford. It has been specifically developed to fit the Rear and has the code: 19849.
This component has dimensions of 6.1 x 3.0 x 4.6 inches and its weight is approximately 0.80 Pounds. The part 7L1Z19849A is available in New condition while meeting the standards of the product rating. The Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Rear belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 7L1Z-19849-A can be known as Control Valve; A/C Expansion Valve. The inventory reference for this item is SKU: 7L1Z-19849-A. Additional manufacturer-provided details include: Auxiliary. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.