Make sure this part fits

Ford YC2Z-9F715-BA
Idle Speed Control

Name: Ford YC2Z-9F715-BA
Brand: Ford
SKU: YC2Z-9F715-BA
Availability: Discontinued

1997-2008 Ford YC2Z9F715BA

Customer Questions & Expert Answers (6)

Part Description
Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV.
Base No.
9F715
Replaces
F7UZ-9F715-CB
Manufacturer
Ford

Make sure this part fits

Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

Vehicle Fitment

Year Make Model	Trim	Engine
2003-2008 Ford E-150	Base, Chateau, XL, XLT	8 Cyl 5.4 L GAS
1997-2002 Ford E-150 Econoline	Base, XL	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
1997-2002 Ford E-150 Econoline Club Wagon	Chateau, Custom, XL, XLT	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
2003-2008 Ford E-250	Base	8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2002, 1997-1999 Ford E-250 Econoline	Base	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
1997-1998 Ford E-350 Econoline	Base, XL	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
1997-2002 Ford E-350 Econoline Club Wagon	Chateau, Custom, XL, XL HD, XLT, XLT HD	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
1999-2008 Ford E-350 Super Duty	Base, Chateau, XL, XLT	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
2000-2005 Ford Excursion	Eddie Bauer, Limited, XLS, XLT	8 Cyl 5.4 L GAS
1999 Ford F-250	Base	8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Warning: California's Proposition 65

Customer Questions & Expert Answers
Q:
Is YC2Z-9F715-BA the part I need for my vehicle? Posted by FordPartsDeal Specialist
A:
Select Your Vehicle model to verify if part number YC2Z-9F715-BA fits your car.
Posted by FordPartsDeal Specialist
Q:
How to Service the Idle Control Valve on Ford E-250 Econoline? Posted by Customer
A:
The service of Idle Control Valve begins by disconnecting the battery ground cable. The first step requires removal of the air cleaner assembly and the accelerator control snow shield. First disconnect the electrical connector from the Idle Control Valve (ICV) before using aRemoving the valve requires removing its bolts followed by valve extraction. Install the component by performing the removal steps in the reverse order.
Posted by FordPartsDeal Specialist
Q:
How to Service the Idle Control Valve on Ford Excursion? Posted by Customer
A:
Service of Idle Control Valve (ICV) starts with disconnecting the battery ground cable. Service of the ICV begins with disconnecting the throttle bypass hose along with the ICV electrical connector. First detach the two securing bolts of the ICV before removing it from its position. During installation position the ICV before tightening its bolts at two stages starting from 10 Nm (89 lb-in) before turning them an additional 90 degrees. Reinstallation requires users to link the throttle bypass hose and ICV electrical connector after finishing valve installation. Complete the procedure by reconnecting the ground cable of the battery.
Posted by FordPartsDeal Specialist
Q:
How to service and repair the Idle Control Valve on Ford E-150 Econoline? Posted by Customer
A:
Service and repair of the Idle Control Valve requires the first step to be disconnecting the battery ground cable. Service of the Idle Control Valve begins with removing both the air cleaner assembly and the accelerator control snow shield. Take the electrical connector cable from the Idle Control Valve before unfastening the two securing bolts. The installation process requires following the backward procedure used during removal.
Posted by FordPartsDeal Specialist
Q:
How to service and repair the Idle Control Valve on Ford F-250 Super Duty? Posted by Customer
A:
A repair or service operation on the Idle Control Valve must start with disconnecting the battery ground cable. You should start by taking off the throttle bypass hose then detach the electrical connector of the Idle Control Valve. Once you remove the bolts from the Idle Control Valve it can be extracted from its place. When installing the Idle Control Valve, position it properly first then proceed with a two-step bolt tightening process starting at 10 Nm (89 Lb-In) then perform another 90-degree tightening rotation. Reconnecting the throttle bypass hose and the Idle Control Valve electrical connector should proceed the battery ground cable reinstallation.
Posted by FordPartsDeal Specialist
Q:
How to service and repair the Idle Control Valve on Ford F-350 Super Duty? Posted by Customer
A:
A repair or service operation on the Idle Control Valve must start with disconnecting the battery ground cable. You should start by taking off the throttle bypass hose then detach the electrical connector of the Idle Control Valve. Once you remove the bolts from the Idle Control Valve it can be extracted from its place. When installing the Idle Control Valve, position it properly first then proceed with a two-step bolt tightening process starting at 10 Nm (89 Lb-In) then perform another 90-degree tightening rotation. Reconnecting the throttle bypass hose and the Idle Control Valve electrical connector should proceed the battery ground cable reinstallation.
Posted by FordPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Idle Speed Control YC2Z-9F715-BA Designed for Proper Fit and Performance

The Ford part YC2Z-9F715-BA Idle Speed Control as a genuine Ford Idle Control Valve component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford YC2Z-9F715-BA Idle Speed Control is used with Ford Excursion, F-250, E-150 Econoline models. The original Ford part will bear the manufacturer part number: YC2Z-9F715-BA and where it is made at Ford. It has the code: 9F715.

This component has dimensions of 11.2 x 9.2 x 9.2 inches and its weight is approximately 2.20 Pounds. The part YC2Z9F715BA is available in New condition while meeting the standards of the product rating. The Valve Assembly - Throttle Air Bypass; Fuel Injection Idle Air Control Valve; IACV. belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part YC2Z-9F715-BA can be known as Valve Assembly - Throttle Air By-Pass; Throttle Air Bypass, and it replaces F7UZ-9F715-CB. The inventory reference for this item is SKU: YC2Z-9F715-BA. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.

Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.