My Garage
Cart
Make sure this part fits

Ford 5L8Z-2221-AB
Overhaul Kit

2002-2006 Ford 5L8Z2221AB

Customer Questions & Expert Answers (10)
Ford 5L8Z-2221-AB Overhaul Kit
  • Part Description
    Kit - Wheel Brake Cylinder; Brake Caliper Repair Kit; Disc Brake Hardware Kit
  • Base No.
    2221
  • Replaced By
    GU2Z-2V120-KRM
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Base No.2221
    Manufacturer Part Number5L8Z-2221-AB
    Part DescriptionKit - Wheel Brake Cylinder; Brake Caliper Repair Kit; Disc Brake Hardware Kit
    Other NamesKit - Wheel Brake Cylinder Repair
    Item Dimensions5.7 x 6.2 x 8.5 inches
    Item Weight9.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerFord
    SKU5L8Z-2221-AB
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Ford EscapeHybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
    2005-2006 Mercury MarinerBase, Convenience, Hybrid, Luxury, Premier4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Do you think this 5L8Z-2221-AB will fit my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 5L8Z-2221-AB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How should the brake master cylinder reservoir be maintained during bleeding for the 2002 Ford Escape? Posted by Customer
    A:
    Ensure it does not run dry, keeping it filled with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or an equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What should be done to internal parts and the piston seal before assembly for the 2004 Ford Escape? Posted by Customer
    A:
    Coat all internal parts and the piston seal with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or an equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What is the first step to service and repair the brake caliper for the 2006 Ford Escape? Posted by Customer
    A:
    Begin by removing the brake caliper and securing it in a vise.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What is the first step to service and repair the front brake caliper for the 2005 Ford Escape? Posted by Customer
    A:
    Ensure the vehicle is in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    Why should denatured alcohol be avoided for flushing the brake system for the 2003 Ford Escape? Posted by Customer
    A:
    It can cause rubber component failure if trapped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What precautions should be taken regarding spills of brake fluid for the 2005 Mercury Mariner? Posted by Customer
    A:
    Wash off any spills with water immediately, as brake fluid can damage painted and plastic surfaces.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    What should be removed before loosening the brake caliper jounce hose for the 2006 Mercury Mariner? Posted by Customer
    A:
    Remove the brake caliper clip.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    How should air pressure be applied during the process for the 2005 Mercury Mariner? Posted by Customer
    A:
    Apply moderate air pressure in short bursts to prevent an uncontrolled release of the piston.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    Q:
    How do you remove the caliper piston for the 2006 Mercury Mariner? Posted by Customer
    A:
    Place a block of wood between the piston and the caliper housing, then apply compressed air through the caliper jounce hose port.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Brake Caliper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 5L8Z-2221-AB, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 5L8Z-2221-AB Overhaul Kit. It is sometimes referred to as Ford Brake Caliper, Ford Wheel Cylinder Repair Kit. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 5L8Z2221AB Overhaul Kit. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery