2000 Ford Windstar Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2000 Ford Windstar

• Q: What safety precautions should be taken when servicing the side Airbag on 2000 Ford Windstar?

  A: Wear safety glasses when servicing the side air bag in order to minimize injuries. Word of caution- Live module should be handled with care and washed hands after deployment. Check the damages after collision and change all damaged parts. Before replacing the air bag, take off the battery, after which it should be properly installed and checked afterwards.
• Q: How to Safely and Effectively Service the Air Bag Control Module on 2000 Ford Windstar?

  A: When servicing the Air Bag Control Module (ACM) drain the backup power supply, remove the battery and wait a minute. Take out the utility compartment and ACM by unplugging connector. Install as reverse. Check the operation of airbags and clear the diagnostic tools before driving on the road.
• Q: What Precautions Should Be Taken When Servicing the Clock Spring on 2000 Ford Windstar?

  A: Wear safety glasses and work cautiously with the module when servicing the air bag sliding contact. Wash hands post deployment, do not probe connectors and change damaged trim covers. Do not remove the battery without first disconnecting it, use special procedures to disassemble, make sure the battery is installed correctly. Do not leave the diagnostic tool in the car, use it during the service.