2001 Ford Windstar Intake Manifold

Part Notes: #2 in illustration. Heater hose - from tee to heater core input, w/ high output (auxiliary) heater/ac,total length = 6.15" (156mm)

Part Notes: Large outer ring gasket. Also serviced in 9A589. See 9H486 for individual port gaskets.

Part Notes: Return tube & hose assy with tee., 3.0L,less high output (auxiliary) heater/ac,less a/c

Part Notes: (AB-153-B) Bolt-M8 x 1.25 x 130 Hex Flange Head (Attach upper to lower intake manifold).

Part Notes: Rod kit only; contains 2 rods and 4 bushings.

Part Notes: Bolt-M6 x 1.0 x 62.5 Hex Flng Pilot. Attach 9424 lwr. intake manifold to 6049 cyl. head

Part Notes: For ambient temperature sensor,round connector round pins, attaches to 19D668 bracket with nut 390429-S100; For oval connector with 2 flat pins use part # F5AZ12A648AB

Part Notes: Mounts to rear of intake manifold with bolt. includes rubber hose to 18663 waterpump tube; Includes o-ring 391356-S100

Part Notes: One(1) package consists of 8 pieces.(8) pieces required per engine

Part Notes: ENG.SZ.: 6 , Metal tube on intake manifold next to Thermostat housing.

Part Notes: Stud-M6 x 15.5 x M6 x 15.5 Pilot - Also serviced in 9424. Attach T-Body to upper intake manifold.