2002 Ford E-350 Super Duty Senders

Part Notes: Aft axle tank, (Stripped Chassis/Cutaway) unleaded gas

Part Notes: Plug with o'ring for access to reservoir (6658) & used on filter housing. (#1825262-C91), 7.3L, FROM 1/12/98

Part Notes: Incl. svc pigtail harness 9A350(mtg nuts N804495-S100 & N807585-S100). Mtg brkt is 9346. Replace the mtg nuts W520202-S309 when replacing the pump(secures 9C407/9346 to the frame)., Diesel 7.3L

Part Notes: Clip 9.0mm & clamp 18mm with tether. Attach fuel supply line to fuel rail., Gas

Part Notes: Cooler O-ring is NOT serviced seperatly, Engine tag # 2E-636 only. For coolant hoses, refer to 8286 Lower Radiator hose

Part Notes: 3 tube(fuel supply/return/vapor) holder clip w/mtg stem. Also serv in 9S296., Cutaway/Stripped Chassis-Gas

Part Notes: Kit does not include metal pipe, use 9034 with vehicle, or body builders pipe , (Cutaway) leaded/diesel fuel, without throw away tank

Part Notes: Hose (bulk) - 3/8" tube size - 25 ft. roll

Part Notes: Also serviced in 9155. Cap-Threaded end-fuel filter. Screws into top of 9N180. (#1831193-C91), 7.3L

Part Notes: (AR-51-A) retainer, 5/16" tube push connect

Part Notes: Hose (bulk) - 5/16" tube size - 25 ft. roll

Part Notes: M6 x 1.0 x 12 hex head (screw & washer assy.) , midship tank

Part Notes: Kit consists of upper pipe,fill hose, vent tube , CUTAWAY. Unleaded fuel, with throw away fuel tank, FROM 1/14/2002

Part Notes: Gas engines, RV prep; caps F7UZ 9S303-AB, Fuel tank aux. drain tube asy., (Stripped Chassis/Cutaway)

Part Notes: (AI-110-DA) push connect, female straight 5/16" connector asy., 7.9mm tube x 6.3mm hole push connect; type 3

Part Notes: (AE-110-EA) push connect, female straight, 3/8" x 5/16" connector asy., 9.5mm tube x 6.4mm hose; type 3

Part Notes: Attach to 9B593 valves on the fuel tank, Diesel

Part Notes: Clip 12.5mm & clamp 18mm with tether. Attach fuel supply line to fuel rail., Gas

Part Notes: Use with midship fuel tank., Regular/Extended Vans/Wagons-Unleaded/Leaded/Diesel fuels

Part Notes: "L" shaped; 34mm High x 35mm Wide x 14mm Thick.
"L" shaped; 34mm High x 35mm Wide x 14mm Thick. , (Stripped Chassis & Cutaway)

Part Notes: Kit consists of fuel cap,fill hose,vent tube,fill pipe , Cutaway, Diesel, with throw away fuel tank, FROM 1/14/2002

Part Notes: Mounts front fuel supply/return/vapor lines (9S273/9S274/9D676). Nylon clip 3 tube holder 52mm wide w/mtg stem., Gas

Part Notes: (Stripped Chassis/ Cutaway) unleaded gas, throwaway tank

Part Notes: (AR-51-C) retainer, 6.35mm push connect (duck bill)

Part Notes: Pressed in block behind water pump; O-rings are W704593- S100