Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford GC3Z-9278-B
Oil Pressure Sensor

1997-2020 Ford GC3Z9278B

Customer Questions & Expert Answers (25)
Ford GC3Z-9278-B Oil Pressure Sensor
Ford GC3Z-9278-B Oil Pressure Sensor
Ford GC3Z-9278-B Oil Pressure Sensor
Ford GC3Z-9278-B Oil Pressure Sensor
Ford GC3Z-9278-B Oil Pressure Sensor
  • Part Description
    Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Sw
  • Replaces
    6U5Z-9278-D, 1U5Z-9278-DA, GC3Z-9278-A, SW-6357
  • Manufacturer
    Ford
Make sure this part fits
$20.37 MSRP: $31.53
You Save: $11.16 (36%)
Ships in 1 Business Day
1
ADD TO CART

  • GC3Z-9278-B Oil Pressure Sensor is Ref No. 15 in the diagram below

    2003 Ford Expedition Oil Pressure Sensor Diagram for GC3Z-9278-B
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for GC3Z-9278-B

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2011 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor, S, Special Edition8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    2003-2014 Ford E-150Base, Chateau, XL, XLT8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    1997-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
    1997-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
    2003-2014 Ford E-250Base8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2002, 1997-1999 Ford E-250 EconolineBase6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1997-1998 Ford E-350 EconolineBase, XL
    1997-2002 Ford E-350 Econoline Club WagonChateau, Custom, XL, XL HD, XLT, XLT HD
    1999-2019 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.2 L FLEX
    2007-2018 Ford EdgeLimited, SE, SEL, SEL Plus, Sport, Titanium6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Will this GC3Z-9278-B work in my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number GC3Z-9278-B fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How do you remove the oil pressure sensor for the 2005 Ford Crown Victoria? Posted by Customer
    A:
    Take out the sensor itself.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the new EOP switch for the 2008 Ford Edge? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    How should the new EOP switch be installed for the 2008 Ford E-150? Posted by Customer
    A:
    Tighten the new switch in two stages: first to 14 Nm (10 lb-ft), and then tighten an additional 180 degrees.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    How should the new EOP switch be installed for the 2007 Ford E-250? Posted by Customer
    A:
    Tighten the new EOP switch in two stages: first to 14 Nm (10 ft. lbs), and then tighten an additional 180 degrees.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the torque specification for installing the EOP sensor for the 2005 Ford Expedition? Posted by Customer
    A:
    Tighten it to 21 Nm (15 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be applied to the threads of the new oil pressure sensor before installation for the 2000 Ford Explorer? Posted by Customer
    A:
    Coat the threads with Pipe Sealant with Teflon D8AZ-19554-A or Wsk-M2G350-A2.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the torque specification for installing the EOP sensor for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Tighten it to 18 Nm (13 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the torque specification for tightening the new EOP switch during installation for the 2007 Ford F-350 Super Duty? Posted by Customer
    A:
    Tighten the new EOP switch to 18 Nm (13 ft. lbs.).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after positioning for the 2009 Ford Flex? Posted by Customer
    A:
    Disconnect the electrical connector from the EOP switch and then remove the switch.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the new EOP switch for the 2009 Ford Taurus? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    How should the new switch be installed for the 2008 Ford Ranger? Posted by Customer
    A:
    Ensure it is tightened to 20 Nm (15 lb-ft).
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after positioning for the 2008 Ford Taurus X? Posted by Customer
    A:
    Disconnect the electrical connector from the EOP switch and then remove the switch itself.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    How do you complete the process after servicing the oil pressure sender for the 2002 Lincoln Blackwood? Posted by Customer
    A:
    Reverse the steps taken during removal.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after positioning the 2009 Lincoln MKS? Posted by Customer
    A:
    Disconnect the electrical connector from the EOP switch and then remove the switch.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the EOP sensor for the 2006 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the new EOP switch for the 2008 Lincoln Mark LT? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after positioning for the 2004 Lincoln Aviator? Posted by Customer
    A:
    Remove the components in the order shown in the accompanying illustration and table.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be removed after positioning for the 2007 Lincoln MKX? Posted by Customer
    A:
    Remove the cooling fan assembly.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be applied to the threads of the EOP switch before installation for the 2009 Lincoln MKZ? Posted by Customer
    A:
    Apply PTFE thread sealant.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the first step to service the oil pressure sender for the 2003 Mercury Marauder? Posted by Customer
    A:
    Disconnect the battery ground cable.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after disconnecting the battery for the 2003 Mercury Grand Marquis? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after disconnecting the battery ground cable for the 2000 Mercury Mountaineer? Posted by Customer
    A:
    Disconnect the oil pressure sensor electrical connector and remove the sensor.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    How do you install the oil pressure sender after servicing for the 2002 Lincoln Town Car? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the new EOP switch for the 2009 Mercury Sable? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Oil Pressure Sensor GC3Z-9278-B Designed for Proper Fit and Performance

The Ford part GC3Z-9278-B Oil Pressure Sensor as a genuine Ford Oil Pressure Switch component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford GC3Z-9278-B Oil Pressure Sensor is used with Ford Ranger, Mustang, Explorer vehicles and Mercury Grand Marquis, Marauder, Mountaineer models and Lincoln Town Car, Navigator, MKZ models. The original Ford part will bear the manufacturer part number: GC3Z-9278-B and where it is made at Ford.
This component has dimensions of 6.3 x 4.1 x 4.1 inches and its weight is approximately 0.30 Pounds. The part GC3Z9278B is available in New condition while meeting the standards of the product rating. The Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Sw belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part GC3Z-9278-B can be known as Pressure Switch; Oil Pressure Switch; Pressure Sensor; Sending Unit; Switch Assembly; Oil Gauge, and it replaces 6U5Z-9278-D, 1U5Z-9278-DA, GC3Z-9278-A, SW-6357. The inventory reference for this item is SKU: GC3Z-9278-B. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.