2005 Mercury Monterey Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Mercury Monterey

• Q: What Precautions Should Be Taken When Servicing the Clock Spring Assembly on 2005 Mercury Monterey?

  A: Wear safety glasses when servicing the Clock Spring assembly and take care of air bag modules. Wash hands after deployment. Disarm, take off steering wheel, errase and cut covers. Unhook the Clock Spring, and make sure to keep it centred when it is attached. Install components, screw them to torque requirement and re-power the system.
• Q: How to Arm and Disarm an Airbag System on 2005 Mercury Monterey?

  A: To disable the air bag system, switch ignition off to on and make sure that all components of SRS are in place. The light of the air bag indicator is supposed to last six seconds. Unless it lights, or flashes there is an SRS fault, and this is signified by five sets of five beeps.
• Q: What precautions should be taken when servicing the air bag control module on 2005 Mercury Monterey?

  A: Use safety glasses when maintaining the air bag control and do not bend the restraints control module when the ignition is ON as it may develop accidental deployment. Check the damaged parts after crashes and repair them. Proper part installation should be ensured and all connections fixed so as to ensure that the air bag system works well prior to the vehicle being returned.