2007 Ford Freestyle Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2007 Ford Freestyle

• Q: What precautions should be taken when servicing the air bag control module and ensuring the proper operation of the restraints control module (RCM) on 2007 Ford Freestyle?

  A: These air bag control modules can be injured easily by not using safety glasses when servicing the module. Check the restraints control module (RCM) following a collision, and replace it (where appropriate). Proper installation and connection is required to prevent risks of deployment. Confirm that the SRS is active then revert the vehicle.
• Q: What Are the Safety Precautions and Installation Steps for Servicing the Airbag Canopy Module on 2007 Ford Freestyle?

  A: Wear safety glasses; point live module away. After deployment, replace headliner and pillar trims; use "air bag" headliner. Inspect roof/fasteners; replace canopy if cover exposed. Don't obstruct deployment or strap module, probe connector, or use memory savers. Depower. Reinstall with torque-prevailing J-nuts; torque 7 Nm bolts, 9 Nm A-pillar bracket.
• Q: What Precautions Should Be Taken When Servicing the Clock Spring Assembly to Minimize Injury Risk and Ensure Proper Installation on 2007 Ford Freestyle?

  A: Wear safety glasses when servicing the Clock Spring assembly and do not use memory savers. When the RCM fuse is disconnected the air bag warning lamp is normal. Make the SRS operational and then hand back the vehicle. Use correct standards of dismantling and re-fitting parts and then re-power the system.