2008 Lincoln MKX Cabin Air Filter, Blower Motor Resistor, Blower Motor

Blower Motor, Blower Motor Resistor, Cabin Air Filter Installation and Repair Tips for 2008 Lincoln MKX

• Q: How to service and repair the blower motor on 2008 Lincoln MKX?

  A: The blower motor can be serviced and repaired by removing the RH lower instrument panel insulator to begin with. Next, remove the electrical connector of the blower motor, and remove the three screws. Remove the blower motor. In order to install a new blower motor, one just has to reverse the sequence.
• Q: How to service and repair the blower motor resistor on 2008 Lincoln MKX?

  A: Tools will be required to remove the blower motor resistor by removing it (unglued) out of the housing, and disconnecting electrical connectors. Check to confirm damage; install new resistor and reconnect, as necessary. Lastly, check of the blower motor and make sure it can work at the required speeds.
• Q: How to access and replace the cabin air filter in dual-zone EATC and EMTC on 2008 Lincoln MKX?

  A: Dual-zone EATC vehicles are fitted with cabin air filter and EMTC vehicles fitted with screen to prevent the ingestion of debris. To remove the filter or screen, one would need to remove the glove compartment. One can be added to vehicles which do not have a filter but only a single filter should be added. Removal and installation are to be done in certain steps.