FordParts
My Garage
My Account
Cart
Powertrain Control
2008 Mercury Milan Camshaft Position Sensor, Crankshaft Position Sensor, MAP Sensor, Engine Control Module
Currently shopping for
2008 Mercury Milan
Change VehicleCategories Close X
Currently selected
Air & Fuel Delivery
Other Categories
A/C & Heating
Belts & Cooling
Body & Hardware
Brakes
Charging & Starting
Driveline & Axles
Electrical
Emission Control & Exhaust
Engine
Headlights & Lighting
Interior & Exterior Trim
Maintenance & Lubrication
Steering
Suspension
Transmission
Categories Close X
How to use OE catalog
2 diagrams found for the vehicle you selected.Select your vehicle options to narrow down results.
- 1.Engine - Air Intake
- 2.Engine / Transaxle - Air Intake
Sort by:
Ref No.
Ref No.
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- 1
- 1
- 1
- 2
- 3
MSRP: $22.44 Your Price: $16.491
- 4
MSRP: $28.98 Your Price: $18.251 - 4
- 5
MSRP: $227.27 Your Price: $138.131
- 6
MSRP: $8.33 Your Price: $5.881
- 7
- 7
- 8
MSRP: $91.30 Your Price: $62.721 - 8
MSRP: $91.30 Your Price: $62.72
MSRP: $34.18 Your Price: $22.09
MSRP: $34.18 Your Price: $22.09
MSRP: $103.27 Your Price: $62.761
MSRP: $36.55 Your Price: $23.011
MSRP: $87.64 Your Price: $52.301
MSRP: $46.36 Your Price: $29.201
MSRP: $181.82 Your Price: $110.501
MSRP: $914.60 Your Price: $617.361
MSRP: $871.67 Your Price: $588.381- MSRP: $684.02 Your Price: $494.451
MSRP: $64.00 Your Price: $39.181
MSRP: $125.09 Your Price: $76.021
MSRP: $94.73 Your Price: $57.571
MSRP: $91.27 Your Price: $55.471
MSRP: $97.82 Your Price: $59.451
MSRP: $95.82 Your Price: $58.231
-W713443-S437
Bolt- Part Notes: M6 x 55MM
- Production Date: From 08/2006
- Fitting Vehicle Options: 6 Cyl 3.5L DOHC VCT SMPI
- Callout Name: HB1
MSRP: $15.00 Your Price: $8.81
-N804795-S441
Nut And Washer Assy - Hex.- Part Notes: M6 X 1.00
- Fit Note: (+) North American Markets
- Production Date: 08/2005-02/2009
- Fitting Vehicle Options: 4 Cyl 2.3L
- Require Quantity: 2
- Package Quantity: 4
- Callout Name: HN1
- Replaced By: -N804795-S439
MSRP: $4.00 Your Price: $2.35
-W701520-S437
Screw- Part Notes: M6 X 52.5
- Production Date: 08/2005-07/2012
- Fitting Vehicle Options: 6 Cyl 3.0L DOHC EFI
- Callout Name: HB2
MSRP: $34.10 Your Price: $20.03
-W710652-S437
Bolt- Part Notes: M6 x 28MM
- Production Date: 08/2005-07/2012
- Fitting Vehicle Options: 6 Cyl 3.0L DOHC EFI
- Callout Name: HB1
MSRP: $16.00 Your Price: $9.40
OEM 2008 Mercury Milan Parts for Powertrain Control
Genuine OEM 2008 Mercury Milan parts are made using the original design, the high standards, in the Mercury official factories, and all of these ensure that they always fit perfectly and easily. FordPartsDeal.com is a trusted source for finding these authentic OEM Powertrain Control parts at very competitive prices. Our professional team is here to help you choose the right 2008 Mercury Milan Camshaft Position Sensor, Crankshaft Position Sensor, MAP Sensor, Engine Control Module, and our fast delivery options ensure that your parts are always delivered quickly.
Camshaft Position Sensor, Engine Control Module, MAP Sensor Installation and Repair Tips for 2008 Mercury Milan
- Q: How to properly maintain the MAP Sensor on a 2008 Mercury Milan?A: Service To remove the MAP sensor, disconnect the electrical connector, unscrew the securing screw and remove the sensor. Connect the new sensor, screwing it to 3 Nm (27 lb-in) and grease the O-ring seal with clean engine oil. Lastly, repeat the process of removal in order to finish the installation.
- Q: How to Service the Camshaft Position Sensor on 2008 Mercury Milan?A: In order to maintain the camshaft position (CMP) sensor, begin by removing the electrical connector. Unscrew the bolt on the CMP and unscrew the sensor. Installation As the new CMP is fitted, lubricate the O-ring seal with clean engine oil and use a 7 Nm (62 lb-in) tightening bolt. Lastly, install the reverse.
- Q: How to remove and replace the Engine Control Module (ECM) on 2008 Mercury Milan?A: In order to change the powertrain control module (PCM), one may have to retrieve it, obtain the module configuration, remove the battery tray, and remove PCM connectors. Unscrew the four bolts, strip the PCM out and replace it with the new PCM. Reconnect connectors, fit battery tray, and re-set up module configuration and PATS.