How to Service and Repair an A/C Condenser on 2000 Ford Contour?

To maintain HVAC condenser, to drain refrigerant, to support radiator, and to lift up the vehicle. Take off the splash shield, remove lines and disassemble the condenser. Take out the brackets, place the radiator and switch off the condenser. To install it, reverse the process and test the A/C system and replace the O-rings with refrigerant oil.

OEM 2000 Ford Contour A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Condenser found

View related parts
2000 Ford Contour Condenser Part Number: XW2Z-19712-AA
Product Specifications
- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: w/integral A/C
- Base No.: 19712
- Item Weight: 8.90 Pounds
- Item Dimensions: 2.1 x 16.2 x 28.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW2Z-19712-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, LX, SE, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Ford Contour A/C Condenser

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Contour A/C Condenser Parts Q&A

Q: How to Service and Repair an A/C Condenser on 2000 Ford Contour?
A: To maintain HVAC condenser, to drain refrigerant, to support radiator, and to lift up the vehicle. Take off the splash shield, remove lines and disassemble the condenser. Take out the brackets, place the radiator and switch off the condenser. To install it, reverse the process and test the A/C system and replace the O-rings with refrigerant oil.