OEM 2000 Ford Contour Power Window Motor

2000 Ford Contour Power Window Motor Parts Q&A

• Q: How to service the rear door power window motor on 2000 Ford Contour?

  A: The first step for servicing the rear door window motor requires removal of the door trim panel along with the door pull using screw removal techniques. The door speaker attachment requires first removing its screws and removing the multiplug. A plastic knife assists in gently separating the watershield over the Butyl strip while users should maintain distance from the adhesive parts to stop re-adhesion problems from occurring. The first step is to connect the electrical connector from the power window operating switch before removing the bolts which are positioned through access holes in the window retaining points. Remove the ground battery cable then operate the window glass to its complete closed position before supporting it. The window regulator requires removal of regulator assembly bolts so the regulator can settle at door bottom before extracting the regulator motor through three bolts or two bolts from the manual regulator. The electrical connection to the regulator motor needs disconnection followed by removal of the window regulator before removing the motor mount nut and bushes associated with it. You should perform the reverse steps to install the system.