How to service the rear door window regulator for manual windows on 2000 Ford Contour?

Service of the rear door window regulator starts by removing door trim panel and door pull through screw removal. Detaching the door speaker starts with unscrewing its fasteners followed by unplugging the multiplug. A plastic knife should be used to wedge open the watershield while slicing through the Butyl strip with precision to avoid damaging the adhesive for re-establishment. Place the window regulator handle into position before taking out the window retaining bolts while keeping them directly over the access holes. The glass should be in complete closure with support until regulator assembly bolt removal enables the assembly to stay at the doorway base. The regulator motor and manual regulator winder need to be taken out by removing three bolts or two bolts respectively to let the assembly sit at the bottom of the door. The window regulator handle and the window regulator must be taken away in the conclusion of this process. The end of installation calls for the opposite deployment process to be executed.

OEM 2000 Ford Contour Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2000 Ford Contour Window Regulator, Passenger Side Part Number: F5RZ5423200A
$13.15 MSRP: $18.19
You Save: $5.04 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly; Regulator
- Position: Passenger Side
- Item Weight: 2.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ5423200A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Ford Contour Window Regulator, Driver Side Part Number: F5RZ5427001A
Product Specifications
- Other Name: Regulator; Regulator Assembly - Window
- Position: Driver Side
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ5427001A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Ford Contour Window Regulator, Passenger Side Part Number: F5RZ-5427000-B
Product Specifications
- Other Name: Regulator Assembly - Window; Regulator
- Manufacturer Note: R.H., , w/power windows
- Position: Passenger Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 18.7 x 5.8 x 20.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ-5427000-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Ford Contour Window Regulator, Driver Side Part Number: F5RZ-5423209-A
Product Specifications
- Other Name: Regulator - Window - Less Motor; Regulator
- Manufacturer Note: L.H., Includes motor, may also require 5421416 regulator to window glass bolt and spacer,
- Position: Driver Side
- Base No.: 23209
- Item Weight: 4.30 Pounds
- Item Dimensions: 24.7 x 3.1 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ-5423209-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Ford Contour Window Regulator, Passenger Side Part Number: F5RZ-5423208-A
Product Specifications
- Other Name: Regulator And Motor; Regulator; Regulator And Motor Assembly - Window
- Manufacturer Note: R.H., Includes motor, may also require 5421416 regulator to window glass bolt and spacer
- Position: Passenger Side
- Base No.: 5423208
- Item Weight: 4.20 Pounds
- Item Dimensions: 3.2 x 10.1 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ-5423208-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Ford Contour Window Regulator, Driver Side Part Number: F5RZ-5423201-A
Product Specifications
- Other Name: Regulator Assembly; Regulator
- Manufacturer Note: L.H., Must also replace 17530 & 041S04
- Position: Driver Side
- Base No.: 5423201
- Item Weight: 3.10 Pounds
- Item Dimensions: 13.4 x 6.8 x 17.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5RZ-5423201-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Contour Submodels:
- Base, GL, GL Sport, LX, LX Sport, SE, Sport, SVT | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Ford Contour Window Regulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Contour Window Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Contour Window Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Contour Window Regulator Parts Q&A

Q: How to service the rear door window regulator for manual windows on 2000 Ford Contour?
A: Service of the rear door window regulator starts by removing door trim panel and door pull through screw removal. Detaching the door speaker starts with unscrewing its fasteners followed by unplugging the multiplug. A plastic knife should be used to wedge open the watershield while slicing through the Butyl strip with precision to avoid damaging the adhesive for re-establishment. Place the window regulator handle into position before taking out the window retaining bolts while keeping them directly over the access holes. The glass should be in complete closure with support until regulator assembly bolt removal enables the assembly to stay at the doorway base. The regulator motor and manual regulator winder need to be taken out by removing three bolts or two bolts respectively to let the assembly sit at the bottom of the door. The window regulator handle and the window regulator must be taken away in the conclusion of this process. The end of installation calls for the opposite deployment process to be executed.