FordParts
My Garage
My Account
Cart
OEM 2000 Ford Crown Victoria Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Evaporator found
Product Specifications- Other Name: Evaporator Assembly; A/C Evaporator Core Repair Kit; A/C Evaporator; Housing Assembly; Case Assembly; Case; Housing
- Manufacturer Note: FROM 5/1/01
- Position: Driver Side
- Base No.: 19A553
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W1Z-19850-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Crown Victoria Evaporator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Crown Victoria Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Crown Victoria Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Crown Victoria Evaporator Parts Q&A
- Q: How to service and repair the evaporator core on 2000 Ford Crown Victoria?A: Service and repair of the evaporator core should begin with disconnecting the battery's ground cable. The service requires you to perform the Refrigerant Discharging and Recovery Procedure. Separate the two halves of the evaporator housing by removing six screws that secure the A/C evaporator core housing followed by precise cutting of the seal into two places. The tubing installation requires using a back up wrench to maintain the fitting and tube from getting damaged during suction accumulator/drier removal from the evaporator core outlet tube. Extract the screws then get rid of both the suction accumulator/drier followed by the removal of the A/C evaporator core. Install by reversing the removal steps while servicing the new evaporator core with PAG compressor oil YN-12-C F7AZ-19589-DA or an equivalent approved by Ford WSH-M1C231-B specification. Also apply the same oil to lubricate the seal.