How to service and repair the voltage regulator on 2000 Ford E-150 Econoline?

In order to service the voltage regulator, take off the generator and its parts. Isolate the voltage regulator, the generator brush and terminal holder. Install again by replacing the parts attaching using screws, and make sure that Test Terminal A is covered with the screw cap. Lastly, restock the generator and screw the brushes into place.

OEM 2000 Ford E-150 Econoline Voltage Regulator

Adjustable Voltage Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Voltage Regulator found

View related parts
2000 Ford E-150 Econoline Voltage Regulator Part Number: F1DZ-10C359-A
Product Specifications
- Other Name: Regulator And Brush; Brush & Holder; Regulator Assembly; Brushes; Regulator; Regulator And Brush Holder Assembly
- Replaces: FODZ-10316-A
- Base No.: 10C359
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F1DZ-10C359-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford E-150 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2000 Ford E-150 Econoline Voltage Regulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford E-150 Econoline Voltage Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford E-150 Econoline Voltage Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford E-150 Econoline Voltage Regulator Parts Q&A

Q: How to service and repair the voltage regulator on 2000 Ford E-150 Econoline?
A: In order to service the voltage regulator, take off the generator and its parts. Isolate the voltage regulator, the generator brush and terminal holder. Install again by replacing the parts attaching using screws, and make sure that Test Terminal A is covered with the screw cap. Lastly, restock the generator and screw the brushes into place.