FordParts
My Garage
My Account
Cart
OEM 2000 Ford E-250 Econoline Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Wiper Motor found
Product Specifications- Other Name: Remanufactured Motor And Linkage Assembly; Windshield Wiper Motor, Front; Motor
- Position: Front
- Replaces: 6C2Z-17508-A, F7UZ-17508-AA, 6C2Z-17V508-ABRM, 6C2Z-17V508-AA
- Base No.: 17V508
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.5 x 6.0 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-17508-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford E-250 Econoline Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford E-250 Econoline Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford E-250 Econoline Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford E-250 Econoline Wiper Motor Parts Q&A
- Q: How to service the wiper motor on 2000 Ford E-250 Econoline?A: Service of the wiper motor requires first removing windshield wiper pivot arms and then opening the hood for proper access. First disconnect the windshield wiper pivot shaft before separating the mounting arm from the cowl top vent panels. First remove the dash panel access cover followed by disconnection of the retaining clip and windshield wiper mounting arm and pivot shaft from the windshield wiper motor. The wiper motor service procedure begins by disconnecting the electrical connector followed by removing the bolts until the entire motor can be removed. Start by returning the retaining clip to the windshield wiper mounting arm and pivot shaft and position the windshield wiper motor into the dash panel before bolt installation. Reconnect the electrical connector before mounting the windshield wiper mounting arm and pivot shaft to the motor position by pressing upward to achieve proper alignment. To finish the installation procedure replace the access cover which is located in both the dash panel and the cowl top vent panels.