How to Service and Repair the Main Climate Control Blend Door Actuator on 2000 Ford Excursion?

The main service procedure for the air door actuator/motor in the main climate control requires the initial step of releasing stops while also lowering the glove compartment door. First remove the screw and then rotate the assembly to detach the electronic blend door actuator with its bracket. The installation procedure will start by undoing the removal steps while manually positioning the temperature blend door for correct alignment between door and actuator. The actuator must not receive power during this operation since improper door interface with the temperature blend may harm the actuator.

OEM 2000 Ford Excursion Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2000 Ford Excursion Temperature Door Actuator
Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 4.5 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford Excursion Actuator, Rear
Part Number: XL3Z-19E616-CA
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator
- Position: Rear
- Replaces: F85Z-19E616-BA
- Base No.: 19E616
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.1 x 3.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-19E616-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2000 Ford Excursion Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Excursion Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Excursion Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Excursion Blend Door Actuator Parts Questions & Experts Answers

Q: How to Service and Repair the Main Climate Control Blend Door Actuator on 2000 Ford Excursion?
A: The main service procedure for the air door actuator/motor in the main climate control requires the initial step of releasing stops while also lowering the glove compartment door. First remove the screw and then rotate the assembly to detach the electronic blend door actuator with its bracket. The installation procedure will start by undoing the removal steps while manually positioning the temperature blend door for correct alignment between door and actuator. The actuator must not receive power during this operation since improper door interface with the temperature blend may harm the actuator.