OEM 2000 Ford Expedition Air Suspension Compressor

2000 Ford Expedition Air Suspension Compressor Parts Questions & Experts Answers

• Q: How to Service and Repair the Air Suspension Compressor on 2000 Ford Expedition?

  A: Begin service and repair procedures of the air compressor and pump on a suitable lifting device after deflating the air suspension system. The process requires avoiding air spring removal during pressurization and providing protective support or venting out the air to prevent accidents or air spring damage. Uncontrolled high-pressure air venting occurs when a disconnection is performed on an air compressor airline which results in personal injury alongside possible component damage. Begin removing the components by removing first the battery cable ground then extracting both windshield washer pump and reservoir. The procedure requires air line disconnect from the air compressor by squeezing quick connect locking rings while pulling out the air lines. Disconnection of air lines should be followed by removal of the air compressor electrical connector then air compressor bracket bolts until the air compressor and drier assembly can be pulled out. The correct connection requires inserting all the white air line into the fitting during installation. The temporary drive symptoms caused by adaptive relearning require at least 16 km (10 mi) of driving before clearance. Abnormalities might appear during the battery disconnect and restore procedure. You should complete the air compressor installation by first reflating the air suspension system then following the opposite removal steps to achieve total installation.