Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Ford Expedition Antenna Cable

Radio Antenna Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antenna Cables found

  • 2000 Ford Expedition Antenna Cable - YL1Z-18812-BA
    2000 Ford Expedition Antenna Cable Diagram - YL1Z-18812-BA
    View related parts

    2000 Ford Expedition Antenna Cable Part Number: YL1Z-18812-BA

    Product Specifications
    • Other Name: Cable Assembly - Extension; Cable Assembly
    • Manufacturer Note: Radio antenna cable asy, Rear cable (attaches from front antenna cable to antenna grid at quarter glass assembly), component of 14A504 wire harness
    • Base No.: 18812
    • Item Weight: 1.00 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YL1Z-18812-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Ford Expedition Submodels:
    • Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
  • 2000 Ford Expedition Antenna Cable - YL1Z-18812-AA
    2000 Ford Expedition Antenna Cable Diagram - YL1Z-18812-AA
    View related parts

    2000 Ford Expedition Antenna Cable Part Number: YL1Z-18812-AA

    Product Specifications
    • Other Name: Cable Assembly - Extension; Cable Assembly
    • Manufacturer Note: Radio antenna cable asy , Front cable in instrument panel (attaches from radio to rear antenna cable).
    • Base No.: 18812
    • Item Weight: 0.80 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YL1Z-18812-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Ford Expedition Submodels:
    • Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2000 Ford Expedition Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Expedition Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Expedition Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Expedition Antenna Cable Parts Q&A

  • Q: How to service and repair the rear antenna cable on 2000 Ford Expedition?
    A: The servicing process for the rear antenna cable must start with taking off the right-hand scuff plate and right-hand A-pillar lower trim panel. The repair process requires first severing the rear antenna lead-in cable from the front antenna lead-in cable which must be followed by unmounting the right-hand rear door scuff plate and right-hand rear quarter trim. You should access the rear antenna cable connection by lowering the headliner and then remove the rear lead-in cable from the antenna cable. First remove the nut from the ground plate then extract the ground plate before cutting off the antenna cable ends. Cut both ends from the antenna cable before finishing the remaining part by taping it to the wiring harness because the antenna needs to remain connected to the harness as one system. To install the new cable follow all removal steps by taping or wiring the cable to the wiring harness to block noise.

Related 2000 Ford Expedition Parts

Alternate Year Models

+
1999 Ford Expedition Antenna Cable 2001 Ford Expedition Antenna Cable