What safety precautions should be taken when servicing the passenger air bag module on 2000 Ford F-150?

Safety glasses should be worn for passenger air bag module servicing since they protect users from accidental deployment-related injuries. The passenger air bag module should always be transported with its air bag and deployment door facing away from you while its deployment door must never be set with its face down. Washing your hands with soap under running water will remove any irritation-causing sodium hydroxide residue after air bag deployment. The air bag module connectors should never be probed because doing so could cause the air bag to deploy and result in injury. The discovery of damage or discoloration on the deployment door requires immediate replacement of the module instead of applying new paint to it. Drivers must check that SRS sensors face the correct direction for deployment during a car crash. After a collision they should check sensor brackets and wiring for crumbling and if any part shows damage to replace it no matter if the air bag exploded or not. Before working on the electrical system you need to first disconnect the battery ground cable then wait for one minute before removing any auxiliary power sources which are connected. The procedure for removing a passenger air bag module begins with disconnecting the battery ground cable followed by instrument panel relay cover removal and disconnection of the air bag module electrical connector and extraction of the upper retaining bolt. Pull down the glove compartment door tabs by pushing their two retaining tabs while positioning them downward before breaking the two bolts securing the lower section to release the module fully. The process of installation requires reversal of all removal steps followed by tightening all bolts to precise specifications before conducting air bag system proofing. Vehicle owners must remove the restraint system diagnostic tool prior to driving because it serves only for service needs and might create safety hazards.

OEM 2000 Ford F-150 Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bags found

View related parts
2000 Ford F-150 Passenger Air Bag, Upper
Part Number: 1L3Z-15044A74-AAC
$534.50 MSRP: $733.35
You Save: $198.85 (28%)
ADD TO CART
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Inflator Module; Passenger Inflator Module
- Position: Upper
- Replaces: XL3Z-15044A74-BBB
- Base No.: 044A74
- Item Weight: 12.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-15044A74-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Diagnostic Module, Prairie Tan
Part Number: XL3Z-15043B13-AAA
$525.73 MSRP: $721.31
You Save: $195.58 (28%)
ADD TO CART
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Base No.: 043B13
- Item Weight: 4.90 Pounds
- Item Dimensions: 10.1 x 6.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-15043B13-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Passenger Air Bag, Upper
Part Number: 1L3Z-15044A74-AAA
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Position: Upper
- Replaces: YL3Z-15044A74-AAD
- Base No.: 044A74
- Item Weight: 13.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-15044A74-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Driver Inflator Module, Black
Part Number: 2L3Z-15043B13-AAB
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Replaces: 2L3Z-15043B13-AAG, XL3Z-15043B13-BBB
- Base No.: 043B13
- Item Weight: 4.60 Pounds
- Item Dimensions: 10.0 x 6.1 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L3Z-15043B13-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Passenger Air Bag, Denim Blue, Upper
Part Number: 1L3Z-15044A74-AAD
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper
- Position: Upper
- Base No.: 044A74
- Item Weight: 9.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-15044A74-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Passenger Air Bag, Black, Upper
Part Number: 1L3Z-15044A74-AAB
Product Specifications
- Other Name: Module; Instrument Panel Air Bag, Upper
- Position: Upper
- Replaces: XL3Z-15044A74-AAB
- Base No.: 044A74
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-15044A74-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Harley-Davidson Edition | 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Inflator Module
Part Number: XL3Z-15043B13-CCC
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Driver Air Bag
- Base No.: 043B13
- Item Weight: 4.20 Pounds
- Item Dimensions: 12.4 x 10.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-15043B13-CCC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Driver Inflator Module, Black
Part Number: XL2Z-78043B13-AAB
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Inflator Module; Driver Air Bag
- Base No.: 043B13
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-78043B13-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-150 Driver Inflator Module
Part Number: XL3Z-15043B13-AAB
Product Specifications
- Other Name: Module; Steering Wheel Air Bag; Diagnostic Module; Driver Air Bag
- Base No.: 043B13
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-15043B13-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2000 Ford F-150 Air Bag

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-150 Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-150 Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-150 Air Bag Parts Questions & Experts Answers

Q: What safety precautions should be taken when servicing the passenger air bag module on 2000 Ford F-150?
A: Safety glasses should be worn for passenger air bag module servicing since they protect users from accidental deployment-related injuries. The passenger air bag module should always be transported with its air bag and deployment door facing away from you while its deployment door must never be set with its face down. Washing your hands with soap under running water will remove any irritation-causing sodium hydroxide residue after air bag deployment. The air bag module connectors should never be probed because doing so could cause the air bag to deploy and result in injury. The discovery of damage or discoloration on the deployment door requires immediate replacement of the module instead of applying new paint to it. Drivers must check that SRS sensors face the correct direction for deployment during a car crash. After a collision they should check sensor brackets and wiring for crumbling and if any part shows damage to replace it no matter if the air bag exploded or not. Before working on the electrical system you need to first disconnect the battery ground cable then wait for one minute before removing any auxiliary power sources which are connected. The procedure for removing a passenger air bag module begins with disconnecting the battery ground cable followed by instrument panel relay cover removal and disconnection of the air bag module electrical connector and extraction of the upper retaining bolt. Pull down the glove compartment door tabs by pushing their two retaining tabs while positioning them downward before breaking the two bolts securing the lower section to release the module fully. The process of installation requires reversal of all removal steps followed by tightening all bolts to precise specifications before conducting air bag system proofing. Vehicle owners must remove the restraint system diagnostic tool prior to driving because it serves only for service needs and might create safety hazards.