FordParts
My Garage
My Account
Cart
OEM 2000 Ford F-250 Super Duty Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2000 Ford F-250 Super Duty Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91You Save: $106.26 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.20 Pounds
- Item Dimensions: 17.3 x 6.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-9D653-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford F-250 Super Duty Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-250 Super Duty Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-250 Super Duty Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford F-250 Super Duty Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2000 Ford F-250 Super Duty?A: The first step for servicing the evaporative emission control canister is to disconnect the battery ground cable because fuel vapor presents a risk of explosion or fire. If your vehicle has an electrical connector it should be disconnected before you proceed to remove both the clamp and the evaporative emissions (EVAP) canister purge outlet tube. You should move ahead to uninstall the bolt that maintains the EVAP canister followed by removing the canister. Detach the canister vent solenoid from the EVAP canister and take off the EVAP canister elbow only if it is equipped. Start by following the reverse order of removal procedures after which perform an EVAP system leak test. The evaporative emission repair verification drive cycle needs to be performed. Applying the Merpol(R) O-ring seal lubricant which matches Ford specification ESE-M99B144-B or a similar product serves to lubricate all evolving emissions O-ring seals.