How to service and repair the shock absorber for the 3-Door and Wagon on 2000 Ford Focus?

Service and repair operations for shock absorbers should start by removing the internal trim panel of the 3-Door luggage compartment. An Allen key should be used to stop the piston rod from turning before removing the shock absorber top mounting nut. Once you have raised the vehicle use supports for it. The Wagon model needs first the upper bolt removal before moving to the shock absorber. The Wagon final suspension component tightening process must be done while the car stands on its road wheels by beginning with the lower bolt then proceeding to tighten the upper bolt. Final bolt tightening for 3-Door models needs vehicle road wheel weight before installing the lower mounting bolt while presenting the shock absorber strut into its hole through using loose washers to guide the strut. When putting the top mounting nut into place prevent the piston rod from rotating by using an Allen key. Reinstall the luggage compartment trim panel followed by tightening the lower mounting bolt while making sure all suspension components experience road wheel weight during the procedure.

OEM 2000 Ford Focus Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Shock Absorbers found

View related parts
2000 Ford Focus Strut, Front Passenger Side Part Number: 3U2Z-18124-TA
$58.43 MSRP: $79.52
You Save: $21.09 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Right Suspension Strut Kit; Complete Strut and Shock Absorber Set.
- Position: Front Passenger Side
- Replaces: 3S4Z-18124-AB
- Base No.: 18124
- Item Weight: 9.60 Pounds
- Item Dimensions: 8.0 x 7.4 x 28.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-18124-TA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Shock Absorber, Rear Part Number: 6S4Z-18125-F
$42.91 MSRP: $58.40
You Save: $15.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 3S4Z-18125-CA, 6S4Z-18125-CA
- Base No.: 18125
- Item Weight: 3.60 Pounds
- Item Dimensions: 19.9 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6S4Z-18125-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Strut, Front Driver Side Part Number: 3S4Z-18124-AA
$68.88 MSRP: $93.74
You Save: $24.86 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Front Left Suspension Strut Kit; Complete Strut Set.; Shock Absorber
- Manufacturer Note: LH, A Motorcraft loaded strut can be used in place of this part.
- Position: Front Driver Side
- Replaces: 3U2Z-18124-BT, 2M5Z-18124-AE, AST-133, 2M5Z-18124-AC, 3S4Z-18124-BA, AST-53
- Base No.: 18124
- Item Weight: 9.40 Pounds
- Item Dimensions: 7.7 x 7.4 x 24.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Shock Absorber, Rear Part Number: 7S4Z-18125-DB
$48.08 MSRP: $78.55
You Save: $30.47 (39%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 6S4Z-18125-E
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 27.0 x 2.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7S4Z-18125-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Strut, Front Passenger Side Part Number: 3S4Z-18124-BB
Product Specifications
- Other Name: Shock Absorber Assembly; Front Right Suspension Strut Kit; Complete Strut Assembly.; Shock Absorber
- Position: Front Passenger Side
- Replaces: 2M5Z-18124-BD
- Base No.: 18124
- Item Weight: 8.80 Pounds
- Item Dimensions: 22.7 x 6.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2000 Ford Focus Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Focus Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Focus Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Focus Shock Absorber Parts Q&A

Q: How to service and repair the shock absorber for the 3-Door and Wagon on 2000 Ford Focus?
A: Service and repair operations for shock absorbers should start by removing the internal trim panel of the 3-Door luggage compartment. An Allen key should be used to stop the piston rod from turning before removing the shock absorber top mounting nut. Once you have raised the vehicle use supports for it. The Wagon model needs first the upper bolt removal before moving to the shock absorber. The Wagon final suspension component tightening process must be done while the car stands on its road wheels by beginning with the lower bolt then proceeding to tighten the upper bolt. Final bolt tightening for 3-Door models needs vehicle road wheel weight before installing the lower mounting bolt while presenting the shock absorber strut into its hole through using loose washers to guide the strut. When putting the top mounting nut into place prevent the piston rod from rotating by using an Allen key. Reinstall the luggage compartment trim panel followed by tightening the lower mounting bolt while making sure all suspension components experience road wheel weight during the procedure.