OEM 2000 Ford Mustang Wiper Motor

2000 Ford Mustang Wiper Motor Parts Questions & Experts Answers

• Q: How to service the windshield wiper motor on 2000 Ford Mustang?

  A: Before servicing the windshield wiper motor you must park the wipers at full height to easily get to the retaining clip on the motor output shaft. Service technicians should detach the batter cable and remove the ventilating panels of the cowl top before starting work. The wiper motor output shaft should be detached from the pivot shaft linkage and mounting arm through clip removal. Electrically disconnect the motor then remove its bolts before extracting the wiper unit. The initial step for installation should start with mounting the new wiper motor with its bolts before you connect the electrical connector. Install the wiper motor only after putting the retaining clip onto the mounting arm and pivot shaft linkage. After reconnecting the negative battery cable you can snap the mounting arm alongside pivot shaft linkage onto the wiper motor output shaft. When you disconnect then reconnect the battery your vehicle will show unusual drive characteristics before it adapts its learning strategy which demands minimum 16 km (10 miles) of driving. Complete the process by cycling the wiper motor to park and after which reinstall the cowl top vent panels while readjusting pivot arms when needed.