How is the windshield wiper motor assembled and what precautions should be taken during its installation on Ford Mustang?

Since the windshield wiper motor contains glass-like permanent magnets within its structure you should handle it with care to maintain its quality. A new wiper motor assembly comes with its linkage arm as a preinstalled component. The first step should involve removing both wiper mounting arm and pivot shaft components. The wiper arms need correct parking functionality which depends on keeping the wiper motor linkage arm attached to the wiper motor assembly. A proper tool should be used to dissociate the wiper motor linkage arm from both the wiper mounting arm and pivot shaft assembly. Secure the windshield wiper motor by removing its three securing bolts before installation and maintain a torque of 15 Nm (11 lb-ft). To finish the installation proceed with the reverse order of the removal process.

How to service the windshield wiper motor on Ford Mustang?

Service the windshield wiper motor by beginning with parking the wipers fully upright to expose the retaining clip on the motor output shaft. The first step begins with removing cowl top vent panels then disconnecting negative battery cable. The next step involves separating the mounting arm with pivot shaft linkage from the wiper motor shaft by clipping it out. You should remove the wiper motor beginning with disconnecting its electrical connector and unfastening the bolts. Begin the installation process by affixing the retaining clip on the mounting arm and pivot shaft linkage and afterward secure the wiper motor with bolts then connect its electrical connector. Fasten the output shaft of the wiper motor with the mounting arm and pivot shaft linkage. The services require drive for 16 km (10 miles) or longer after negative battery reconnect to restore normal vehicle behavior during adaptive strategy learning. Complete the wiper motor cycling in park position while reattaching the cowl top vent panels by adjusting the pivot arms for proper functionality.

OEM Ford Mustang Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Motors found

View related parts
Ford Mustang Wiper Motor Part Number: 8R3Z-17508-A
$156.91 MSRP: $258.18
You Save: $101.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor; Wiper Motor Assembly
- Manufacturer Note: Motor And Crank Arm
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford Mustang | Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford Mustang Wiper Motor Part Number: 8L3Z-17508-B
$277.04 MSRP: $460.00
You Save: $182.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor; Front Motor; Motor
- Manufacturer Note: Motor Only
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Mustang | Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Wiper Motor Part Number: FR3Z-17508-B
$149.18 MSRP: $245.45
You Save: $96.27 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper
- Replaces: FR3Z-17508-A, WM-831
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2024 Ford Mustang | Dark Horse, Dark Horse Premium, EcoBoost, EcoBoost Premium, GT, GT Premium | 4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
View related parts
Ford Mustang Wiper Motor Part Number: FR3Z-17508-A
$149.18 MSRP: $245.45
You Save: $96.27 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor
- Replaced by: FR3Z-17508-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2023 Ford Mustang | Bullitt, EcoBoost, EcoBoost Premium, GT, GT 50 Years Limited Edition, GT Premium, Mach 1, Shelby GT350, Shelby GT350R, Shelby GT500, V6 | 4 Cyl 2.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.2 L GAS
View related parts
Ford Mustang Wiper Motor Part Number: 6L1Z-17508-AARM
Product Specifications
- Other Name: Remanufactured Motor Assembly - Wiper; Windshield Wiper Motor; Wiper Linkage; Motor & Linkage; Front Motor; Motor; Motor Assembly - Wiper
- Replaces: 4R3Z-17508-AA, 5L2Z-17508-AA, 6W6Z-17508-AA, 6L2Z-17508-AA, 2C3Z-17508-AA, WM-634, 2L1Z-17508-AA, 3L2Z-17508-AA, 4W6Z-17508-B, 6L1Z-17V508-AARM, 6L1Z-17508-AB, 6W1Z-17508-AA, 6W4Z-17508-AA, WM-681, WM-651, WM-652
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford Mustang | Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Mustang Wiper Motor Part Number: 6U2Z-17V508-TARM
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-2004 Ford Mustang | Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS

Ford Mustang Wiper Motor

OEM Wiper Motor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wiper Motor with long life and a perfect fit. Come to our website and find genuine Ford Mustang parts. We keep a wide inventory of OEM Mustang parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Wiper Motor is one of those parts that operate the windshield wipers on Ford Mustang vehicles to wipe the rain and other dirt for enhanced visibility. This electric motor runs at different revolutions per minute enabling drivers to set the pace of wiper blade in line with the prevailing weather condition. New and refurbished Wiper Motors for Ford Mustang can be bought. New motors are bought from the manufacturer while the rebored motors are motors that have been used before but have been modernised to produce new standards of performance. The nature of these types can impact greatly the dependability and the expense for Mustang owners who require a Wiper Motor replacement or maintenance.

Ford Mustang Wiper Motor Parts and Q&A

Wiper Motor
8R3Z-17508-A
Q: How is the windshield wiper motor assembled and what precautions should be taken during its installation on Ford Mustang?
A:
Since the windshield wiper motor contains glass-like permanent magnets within its structure you should handle it with care to maintain its quality. A new wiper motor assembly comes with its linkage arm as a preinstalled component. The first step should involve removing both wiper mounting arm and pivot shaft components. The Wiper Arms need correct parking functionality which depends on keeping the wiper motor linkage arm attached to the wiper motor assembly. A proper tool should be used to dissociate the wiper motor linkage arm from both the wiper mounting arm and pivot shaft assembly. Secure the windshield wiper motor by removing its three securing bolts before installation and maintain a torque of 15 Nm (11 lb-ft). To finish the installation proceed with the reverse order of the removal process.
Wiper Motor
6U2Z-17V508-TARM
Q: How to service the windshield wiper motor on Ford Mustang?
A:
Service the windshield wiper motor by beginning with parking the wipers fully upright to expose the retaining clip on the motor output shaft. The first step begins with removing cowl top vent panels then disconnecting negative Battery Cable. The next step involves separating the mounting arm with pivot shaft linkage from the wiper motor shaft by clipping it out. You should remove the wiper motor beginning with disconnecting its electrical connector and unfastening the bolts. Begin the installation process by affixing the retaining clip on the mounting arm and pivot shaft linkage and afterward secure the wiper motor with bolts then connect its electrical connector. Fasten the output shaft of the wiper motor with the mounting arm and pivot shaft linkage. The services require drive for 16 km (10 miles) or longer after negative battery reconnect to restore normal vehicle behavior during adaptive strategy learning. Complete the wiper motor cycling in park position while reattaching the cowl top vent panels by adjusting the pivot arms for proper functionality.