OEM 2000 Ford Ranger Wiper Motor

2000 Ford Ranger Wiper Motor Parts Q&A

• Q: How to service the windshield wiper motor on 2000 Ford Ranger?

  A: Service of the windshield wiper motor requires a placement of the wiper blades in the straight-up position before continuation. You need to disconnect the grounding cable of the battery together with the electrical connector from the windshield wiper motor. Start the windshield wiper motor service by removing the right-hand access cover through its screw and its direct removal. The motor clip connected to the right-hand mounting arm and pivot shaft must be released through the access opening. The right-hand windshield wiper mounting arm and pivot shaft need disconnection from the left-hand mounting arm and pivot shaft before moving them away from the windshield wiper motor. You must detach the windshield wiper motor by unfastening the stud bolt along with the bolts. To install the part follow all step reverse orders while making sure the mounting arm and pivot shaft retainer clip sits completely on the motor crank to stay safe from damage. SDA nor 749 should be installed during motor assembly steps yet before you install RMS and SDA unity they should be installed on their respective side. The windshield wiper motor shows no potential for repair because any wear or damage requires replacement rather than restoration.