How to service and repair the brake light switch on 2000 Ford Taurus?

Service and repair of brake light switch requires users to disconnect the battery ground cable first. The first step requires removing the BPP switch by disconnecting the electrical connector, removing the self-locking pin before taking the BPP switch off the push rod of the brake master cylinder. Apply the installation steps in reverse order during reinstall.

OEM 2000 Ford Taurus Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2000 Ford Taurus Stoplamp Switch Part Number: 3F1Z-13480-AA
$41.45 MSRP: $65.82
You Save: $24.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Manufacturer Note: service kit - includes pigtails for servicing prior year models.
- Replaces: 1F1Z-14A411-BA, 1F1Z-14A411-CA, SW-5567, YF1Z-13480-BA, 4F1Z-13480-BA
- Base No.: 14A411
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2000 Ford Taurus Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Taurus Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Taurus Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Taurus Brake Light Switch Parts Q&A

Q: How to service and repair the brake light switch on 2000 Ford Taurus?
A: Service and repair of brake light switch requires users to disconnect the battery ground cable first. The first step requires removing the BPP switch by disconnecting the electrical connector, removing the self-locking pin before taking the BPP switch off the push rod of the brake master cylinder. Apply the installation steps in reverse order during reinstall.