Other Name: Switch Assembly - Front Door; Door Lock Switch, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Driver Side
Base No.: 14028
Item Weight: 0.30 Pounds
Item Dimensions: 6.2 x 4.2 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YF1Z-14028-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Ford Taurus Submodels:
SE, SE Comfort, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
2000 Ford Taurus Door Jamb Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Taurus Door Jamb Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Taurus Door Jamb Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Taurus Door Jamb Switch Parts Q&A
Q: How to service the front door jamb switch on 2000 Ford Taurus?
A: Service of the front door ajar switch requires first removing the front door trim panel while setting the watershield aside. Separate the cable guide of the interior handle while also removing the bolt at the window glass run channel. The bolts need to be taken out with the center window glass support set aside before the exterior door handle actuating rod can be disconnected by opening its locking clip. Use a flat tool to remove the lock rod from the lock cylinder then take out the door latch bolts including the electrical connector(s) removal. You must set aside the front door latch and cable assembly before removing the door ajar switch by lifting the locking tab at the lower end followed by a counterclockwise rotation. You should perform the opposite steps during installation.