OEM 2000 Ford Windstar Brake Booster

2000 Ford Windstar Brake Booster Parts Q&A

• Q: How to service and repair the vacuum brake booster on 2000 Ford Windstar?

  A: Service and repair of the vacuum brake booster starts with disconnecting the battery ground cable. Start the service by taking out both the air cleaner assembly and the brake master cylinder. You need to disconnect the vacuum hose of the power brake booster check valve. 1. Users must disconnect speed control cables from 3.8L engine vehicles before they detach accelerator cables and uninstall the wiring harness bracket. Start the vacuum brake booster service by removing the bracket bolts from their cable mount then placing the bracket to the side. Position the speed control module aside after you remove its mounting bolts. Removal of the instrument close-out panel bolts is necessary for the 3.8L engine before taking off the panel. First remove the stoplight switch self-locking Din and continue by sliding the stoplight switch along with its booster push rod and bushing off the brake pedal pin. As the final step remove all power brake booster nuts and remove the power brake booster itself. Follow the opposite steps from removal to reinstall the components.