OEM 2001 Ford Windstar Brake Booster

2001 Ford Windstar Brake Booster Parts Q&A

• Q: How to service and repair the vacuum brake booster on 2001 Ford Windstar?

  A: Service and repair operations of vacuum brake boosters need a starting point which is disconnecting the battery ground cable. Start by removing both the air cleaner assembly along with the brake master cylinder. You should disconnect the vacuum hose which connects to the power brake booster check valve. The power brake booster service demands a complete disconnect of speed control and accelerator cables when performing work on vehicles using a 3.8L engine. First detach the cable bracket bolts from the booster then move the bracket out of the way before taking off the speed control module bolts which allow the module to be set aside. Use a screwdriver to detach the instrument close-out panel bolts after which you should remove the panel. To start uninstall the stoplight switch self-locking pin followed by sliding off the stoplight switch together with booster push rod and bushing which are attached to the brake pedal pin. The power brake booster nuts should be removed before the power brake booster can be taken out. Installation demands executing the removal procedure in reverse order.