How to service the rear bumper cover on 2000 Ford Windstar?

Service of the rear bumper cover requires detachment of both pin-type retainers and screws that are present on each side of the bumper. Attached vehicles with parking aid sensors need their electrical connector to be removed. The next step should involve removing screws before taking out the rear bumper cover which has part number 17K835. The service of bumper covers requires removal of chrome garnish moulding if it is present. The installation procedure requires performing the steps of removal in reverse order.

OEM 2000 Ford Windstar Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Bumpers found

View related parts
2000 Ford Windstar Bumper Cover Part Number: YF2Z-17K835-AA
$185.99 MSRP: $253.10
You Save: $67.11 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Manufacturer Note: Primed, smooth - includes integral step pad, must drill holes for w/park aid. completely interchangeable with YF2Z 17K835-BA, SE, SEL, Limited - w/ or w/o reverse park aid
- Replaces: YF2Z-17B807-EA, YF2Z-17K835-BA
- Base No.: 17K835
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-17K835-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Impact Bar, Front Part Number: 3F2Z-17757-AA
$104.39 MSRP: $142.06
You Save: $37.67 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: XF2Z-17757-AA
- Base No.: 17757
- Item Weight: 15.40 Pounds
- Item Dimensions: 8.2 x 6.1 x 54.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Impact Bar Part Number: XF2Z-17906-AA
$79.02 MSRP: $109.32
You Save: $30.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Manufacturer Note: Bar only , order 17K835 cover separately
- Replaces: F68Z-17906-AA
- Base No.: 17906
- Item Weight: 13.40 Pounds
- Item Dimensions: 68.0 x 9.3 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover Part Number: 1F2Z-17D957-KAA
Product Specifications
- Other Name: Cover
- Replaces: YF2Z-17D957-KB
- Base No.: 17D957
- Item Weight: 25.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F2Z-17D957-KAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Gray Part Number: YF2Z-17D957-LB
Product Specifications
- Other Name: Cover
- Manufacturer Note: Neutral Grey (lower); paint to match (upper)- use with B4, D6, FL, TS, UA, WT paint codes, Base, LX
- Base No.: 17D957
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-17D957-LB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Gold Part Number: YF2Z-17D957-JB
Product Specifications
- Other Name: Cover
- Manufacturer Note: Harvest Gold (lower); Paint to match (upper)- use with B2 paint code, Base, LX
- Base No.: 17D957
- Item Weight: 11.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-17D957-JB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Green Part Number: YF2Z-17D957-HB
Product Specifications
- Other Name: Cover
- Manufacturer Note: Winter Green (lower); Paint to Match (upper)- use with FS, PA paint codes, Base, LX
- Base No.: 17D957
- Item Weight: 11.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-17D957-HB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Blue Part Number: YF2Z-17D957-GB
Product Specifications
- Other Name: Cover
- Manufacturer Note: Med. Steel Blue (lower); Paint to match (upper)- use with LA, SP paint codes, Base, LX
- Base No.: 17D957
- Item Weight: 11.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF2Z-17D957-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Neutral Gray Part Number: XF2Z-17K835-AAD
Product Specifications
- Other Name: Cover
- Replaces: YF2Z-17K835-CAA
- Base No.: 17K835
- Item Weight: 8.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17K835-AAD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Green Part Number: XF2Z-17K835-AAC
Product Specifications
- Other Name: Cover
- Base No.: 17K835
- Item Weight: 8.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17K835-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Steel Blue Part Number: XF2Z-17K835-AAB
Product Specifications
- Other Name: Cover
- Base No.: 17K835
- Item Weight: 11.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17K835-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Bumper Cover, Harvest Gold Part Number: XF2Z-17K835-AAA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Harvest Gold - must drill holes for w/park aid, Base(GL), LX - w/ or w/o reverse park aid, used w/ (B2) Harvest Gold
- Base No.: 17K835
- Item Weight: 12.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17K835-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2000 Ford Windstar Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Windstar Bumper Parts Q&A

Q: How to service the rear bumper cover on 2000 Ford Windstar?
A: Service of the rear bumper cover requires detachment of both pin-type retainers and screws that are present on each side of the bumper. Attached vehicles with parking aid sensors need their electrical connector to be removed. The next step should involve removing screws before taking out the rear bumper cover which has part number 17K835. The service of bumper covers requires removal of chrome garnish moulding if it is present. The installation procedure requires performing the steps of removal in reverse order.