How to service and repair the ignition coil on 2000 Ford Windstar?

A correct start to service and repair the ignition coil requires the electrical connector removal followed by unplugging the spark plug wires through the process of tab squeezing and upward twisting motion. Before removing the spark plug wires proper marking of their positions needs to be done since it is essential to install them correctly to the ignition coil terminal. When removing the spark plug wire boots do it while twisting them to stop any possible harm to the system. The ignition coil removal starts by removing four bolts which allows you to clean the ignition coil towers with a soapy dampened cloth. The installation process should follow the exact opposite of these removal steps.

OEM 2000 Ford Windstar Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2000 Ford Windstar Ignition Coil Part Number: F5SZ-12029-B
$90.50 MSRP: $148.91
You Save: $58.41 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil Assembly; Coil
- Replaces: F1SZ-12029-A, F5SZ-12029-A
- Base No.: 12029
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.2 x 4.4 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F5SZ-12029-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, GL, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2000 Ford Windstar Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Windstar Ignition Coil Parts Q&A

Q: How to service and repair the ignition coil on 2000 Ford Windstar?
A: A correct start to service and repair the ignition coil requires the electrical connector removal followed by unplugging the spark plug wires through the process of tab squeezing and upward twisting motion. Before removing the spark plug wires proper marking of their positions needs to be done since it is essential to install them correctly to the ignition coil terminal. When removing the spark plug wire boots do it while twisting them to stop any possible harm to the system. The ignition coil removal starts by removing four bolts which allows you to clean the ignition coil towers with a soapy dampened cloth. The installation process should follow the exact opposite of these removal steps.