FordParts
My Garage
My Account
Cart
OEM 2000 Ford Windstar Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2000 Ford Windstar Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91You Save: $106.26 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.20 Pounds
- Item Dimensions: 17.3 x 6.2 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-9D653-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford Windstar Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford Windstar Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2000 Ford Windstar?A: Disconnection of the battery ground cable represents the first step before servicing or repairing the evaporative emission control canister because it reduces the potential for fuel vapor fire and explosions. Proceed by lifting and supporting the vehicle before you remove both the EVAP canister purge outlet tube along with the connector. Start by removing the bolts that secure the canister vent solenoid hose assembly after which you should discard the evaporative emissions dust separator. The service technician should first remove the canister vent solenoid and then proceed to remove the evaporative emissions canister last. To install the components follow the process in the opposite order of removal. The system requires leak testing after installation and needs a verification drive cycle for the evaporative emission repair. The installation requires Merpol(R) O-Ring Seal Lubricant or Ford specification ESE-M99B144-B equivalent to lubricate all O-ring seals.