How to service and repair the left-hand exhaust manifold on 2000 Ford Windstar?

The first step to service or repair the left-hand exhaust manifold requires users to disconnect the battery ground cable followed by vehicle hoisting. The first step is to remove the dual converter Y-pipe while the vehicle rests low to the ground after that remove the oil level indicator tube by taking out its nut and tube section. The left-hand exhaust manifold removal process requires the detachment of bolts plus disposal of the gasket. You must place a new exhaust manifold gasket on the hole then secure the exhaust manifold with its bolts. The bolt installation process should follow a step-by-step method starting with 10 Nm (8 ft. lbs.) then moving to 22 Nm (16 ft. lbs.). Secure the oil level indicator tube by position it first then using the nut to fasten it. After raising the vehicle you should mount the dual converter Y-pipe before lowering the vehicle to complete with reconnecting the battery ground cable.

OEM 2000 Ford Windstar Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Manifolds found

View related parts
2000 Ford Windstar Exhaust Manifold, Driver Side
Part Number: 4F2Z-9431-BA
$244.04 MSRP: $337.60
You Save: $93.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 9.40 Pounds
- Item Dimensions: 14.7 x 11.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Exhaust Manifold, Passenger Side
Part Number: 5F2Z-9430-B
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right
- Position: Passenger Side
- Replaces: 5F2Z-9430-A
- Base No.: 9430A
- Item Weight: 9.80 Pounds
- Item Dimensions: 14.8 x 9.7 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-9430-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
2000 Ford Windstar Exhaust Manifold, Driver Side
Part Number: XF2Z-9431-AA
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Manufacturer Note: LH Note: Mounting gasket F7DZ,9448,BB. Mounting bolt N811571,S431 (5) & stud N811572,S431 (1).
- Position: Driver Side
- Base No.: 9431
- Item Weight: 10.60 Pounds
- Item Dimensions: 20.6 x 10.0 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
2000 Ford Windstar Exhaust Manifold, Passenger Side
Part Number: XF2Z-9430-DA
Product Specifications
- Other Name: Manifold Assembly - Exhaust
- Manufacturer Note: RH Note: Mounting gasket F7DZ,9448,BB. Mounting bolt N811571,S431 (6).
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 11.10 Pounds
- Item Dimensions: 18.2 x 10.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-9430-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Windstar Submodels:
- 3.0L, Base, SE, SEL | 6 Cyl 3.0 L GAS

2000 Ford Windstar Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Windstar Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Windstar Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Windstar Exhaust Manifold Parts Questions & Experts Answers

Q: How to service and repair the left-hand exhaust manifold on 2000 Ford Windstar?
A: The first step to service or repair the left-hand exhaust manifold requires users to disconnect the battery ground cable followed by vehicle hoisting. The first step is to remove the dual converter Y-pipe while the vehicle rests low to the ground after that remove the oil level indicator tube by taking out its nut and tube section. The left-hand exhaust manifold removal process requires the detachment of bolts plus disposal of the gasket. You must place a new exhaust manifold gasket on the hole then secure the exhaust manifold with its bolts. The bolt installation process should follow a step-by-step method starting with 10 Nm (8 ft. lbs.) then moving to 22 Nm (16 ft. lbs.). Secure the oil level indicator tube by position it first then using the nut to fasten it. After raising the vehicle you should mount the dual converter Y-pipe before lowering the vehicle to complete with reconnecting the battery ground cable.