How to Service and Repair the Vapor Canister on Ford Windstar?

Disconnection of the battery ground cable represents the first step before servicing or repairing the evaporative emission control canister because it reduces the potential for fuel vapor fire and explosions. Proceed by lifting and supporting the vehicle before you remove both the EVAP canister purge outlet tube along with the connector. Start by removing the bolts that secure the canister vent solenoid hose assembly after which you should discard the evaporative emissions dust separator. The service technician should first remove the canister vent solenoid and then proceed to remove the evaporative emissions canister last. To install the components follow the process in the opposite order of removal. The system requires leak testing after installation and needs a verification drive cycle for the evaporative emission repair. The installation requires MERPOL(R) O-Ring Seal Lubricant or Ford specification ESE-M99B144-B equivalent to lubricate all O-ring seals.

OEM Ford Windstar Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Vapor Canisters found

View related parts
Ford Windstar Vapor Canister
Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09
You Save: $105.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2003 Ford Windstar | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Vapor Canister
Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91
You Save: $106.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford Windstar | 3.0L, Base, Limited, LX, SE, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Vapor Canister
Part Number: F65Z-9D653-AA
$85.64 MSRP: $140.91
You Save: $55.27 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Windstar Vapor Canister
Part Number: F5OZ-9D653-AA
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Windstar | 3.0L, Base, GL, Limited, LX | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

Ford Windstar Vapor Canister

Welcome to our website where you can discover high-quality, genuine Ford Windstar Vapor Canister. We offer an extensive inventory of OEM Ford Windstar Vapor Canister at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Windstar Vapor Canister Parts Questions & Experts Answers

Vapor Canister
F75Z-9D653-AC
Q: How to Service and Repair the Vapor Canister on Ford Windstar?
A: Disconnection of the battery ground cable represents the first step before servicing or repairing the evaporative emission control canister because it reduces the potential for fuel vapor fire and explosions. Proceed by lifting and supporting the vehicle before you remove both the EVAP canister purge outlet tube along with the connector. Start by removing the bolts that secure the canister vent solenoid hose assembly after which you should discard the evaporative emissions dust separator. The service technician should first remove the canister vent solenoid and then proceed to remove the evaporative emissions canister last. To install the components follow the process in the opposite order of removal. The system requires leak testing after installation and needs a verification drive cycle for the evaporative emission repair. The installation requires MERPOL(R) O-Ring Seal Lubricant or Ford specification ESE-M99B144-B equivalent to lubricate all O-ring seals.