FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln LS Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2000 Lincoln LS Purge Valve Part Number: XW4Z-9D289-AG
Product Specifications- Other Name: Tube Assembly - Fuel Vapor; Vapor Canister Vent Solenoid; Canister Purge Valve
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9D289-AG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Vent Control Solenoid Part Number: XW4Z-9F945-AA
Product Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Solenoid
- Base No.: 9F945
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.3 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln LS Canister Purge Valve Parts Q&A
- Q: How to Service and Repair the Canister Purge Valve on 2000 Lincoln LS?A: Disconnection of the battery ground cable serves as the first step to repair or service the canister purge valve since electrical sparks from connected power cause the risk of igniting fuel vapors. The work area must remain completely free from smoking as well as open flames. Begin the job by removing first the vacuum line then the evap return tube and finally the connector and evap canister purge outlet tube. Disconnect the evap canister purge valve when all these connections are taken away. The evap canister assembly must have a leak test prior to installation by performing the removal steps in reverse order. Also perform the drive cycle required for verifying evaporative emission repairs. Apply Merpol(R) or a material matching Ford specifications Ese-M99B144-B on O-ring seals during the installation process.