My Garage
Cart

OEM 2000 Lincoln LS Door Latch Assembly

Door Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Latch Assemblys found

  • 2000 Lincoln LS Door Latch Assembly Diagram - 2W4Z-54203A29-AB
    View related parts
    Product Specifications
    • Other Name: Latch; Door Latch Assembly; Door Lock; Lock
    • Position: Driver Side
    • Replaces: 1W4Z-54203A29-AC, YW4Z-54203A29-AC
    • Base No.: <21812
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 7.2 x 4.4 x 20.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2W4Z-54203A29-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Lincoln LS Submodels:
    • Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
  • 2000 Lincoln LS Door Latch Assembly - 2W4Z-54203A29-EA
    2000 Lincoln LS Door Latch Assembly Diagram - 2W4Z-54203A29-EA
    View related parts
    Product Specifications
    • Other Name: Module; Door Latch Assembly; Door Lock; Lock
    • Position: Driver Side
    • Base No.: <21812
    • Item Weight: 2.90 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 2W4Z-54203A29-EA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2000 Lincoln LS Submodels:
    • Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2000 Lincoln LS Door Latch Assembly

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Lincoln LS Door Latch Assembly Parts Q&A

  • Q: How to service and repair the driver Door Latch Assembly on 2000 Lincoln LS?
    A: The service and repair work on driver door latches requires disconnecting the battery ground cable before carrying out activities close to the door cylinder lock rod or door latch. The service starts with removing the front door trim panel while also unfastening the lower theft shield screw. Position the theft shield by removing its attached nut before taking out the second nut and the lock cylinder. After unclipping the rod linking the exterior handle actuator you should remove the exterior door lock switch electrical connector if your vehicle has it. You should disconnect the electrical connector and take out the door latch screws. Secondly, remove the interior handle actuating cable before extracting the door latch from the vehicle. Installation demands that you follow the reverse sequence of the uninstallation steps.

Related 2000 Lincoln LS Parts