FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln LS Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Power Steering Pump found
2000 Lincoln LS Power Steering Pump Part Number: XW4Z-3A674-GBRM
$134.42 MSRP: $223.64You Save: $89.22 (40%)Product Specifications- Other Name: Remanufactured Pump Assembly - Power Steering; Pump Assembly - Power Steering
- Base No.: 3A674
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.0 x 5.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-3A674-GBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln LS Power Steering Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln LS Power Steering Pump Parts Q&A
- Q: How to service and repair the power steering pump on 2000 Lincoln LS?A: Start power steering pump repair by detaching four pushpins then the engine cover and proceeding with removing the air cleaner and the air cleaner outlet tube. The procedure starts with belt removal followed by unclamping the power steering reservoir-to-pump hose for draining into a suitable container. First position the vehicle on a hoist and then you need to remove both tire and wheel assembly. First disconnect the two bolts and pushpin and shield and then move on to discarding two more pushpins and another shield before removing the bolt and power steering pressure hose. Start to remove the next bolt after disconnecting the power steering pressure hose plus removing its bolt. After lowering the vehicle remove all pump-securing bolts. Fasten the power steering pressure hose fitting with a new O-ring while leaving the upper bolts untightened until all lower bolts have been installed. Raise the vehicle to install the bolt and power steering pressure hose after you reinstall both the pump and its bolts. First install another bolt after putting on the shield followed by its attachment to two pushpins before inserting the shield via one pushpin while securing it with two bolts. After installing the wheel time assembly users should lower the car before tightening every fastener. The next procedure involves the accessory drive belt then the air cleaner outlet tube followed by the air cleaner cover while examining pushpins for damage before replacing damaged ones. Reinstall the engine cover while using four pushpins and fill up the system and perform a leak test.