Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
Base, Black Label, L, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb; Tail Light Bulbs; Car Bulbs; License Lamp Bulb
Base No.: 13466
Item Weight: 0.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: F67Z-13466-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln Navigator Submodels:
Base | 8 Cyl 5.4 L GAS
2000 Lincoln Navigator Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Navigator Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Navigator Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln Navigator Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2000 Lincoln Navigator?
A: The service process for the headlamp bulb begins by taking out the complete headlamp assembly. Begin by turning the headlamp bulb protective cover to the counterclockwise direction to release it followed by disconnecting the electrical connector from the bulb. The bulb retainer can be taken off by turning it counterclockwise before slowly extracting the headlamp bulb by rocking it upward and downward. During installation reverse the steps by positioning the headlamp assembly correctly and aligning the alignment pins into the appropriate holes on the ribs of the reinforcement. You must grip the halogen bulb at its base to handle it properly since casual contact with the glass envelope can lead to shattering due to pressure-buildup within. The bulb removal should take place only right before lamp replacement because external contaminants may affect bulb performance and should never be activated without the missing bulb.