My Garage
Cart
Make sure this part fits

Ford F58Z-13466-CB
Exterior Bulbs

1995-2007 Ford F58Z13466CB

Customer Questions & Expert Answers (40)
Ford F58Z-13466-CB Exterior Bulbs
  • Part Description
    Bulb; Fog Light Bulb; Fog Light Bulbs; Car Bulbs
  • Base No.
    13466
  • Manufacturer
    Ford
Make sure this part fits
$46.04 MSRP: $62.65
You Save: $16.61 (27%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2003 Ford EscortBase, LX, SE, Sport, ZX2, ZX2 Cool Coupe, ZX2 Hot Coupe, ZX2 S/R4 Cyl 2.0 L GAS
    1995-2001 Ford ExplorerEddie Bauer, Expedition, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
    2000-2007 Ford FocusLX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
    1996-2004 Ford MustangBase, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2000-2007 Ford TaurusLX, SE, SE Comfort, SEL, SES, SVG6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
    1995-2003 Ford Windstar3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
    2002 Lincoln BlackwoodBase8 Cyl 5.4 L GAS
    1998-2002 Lincoln NavigatorBase8 Cyl 5.4 L GAS
    1997-2001 Mercury MountaineerBase6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
    2000-2005 Mercury SableGS, LS, LS Premium, Platinum Edition6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you verify if F58Z-13466-CB is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F58Z-13466-CB fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    What do you do to disconnect the connector from the bulb for the 2001 Ford Escort? Posted by Customer
    A:
    Pull the connector rearward.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done to handle the halogen headlamp bulb safely for the 2003 Ford Escort? Posted by Customer
    A:
    Grasp only its base and avoid contact with the glass to prevent shattering.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What may happen after disconnecting and reconnecting the battery for the 2001 Ford Explorer? Posted by Customer
    A:
    The vehicle may exhibit abnormal drive symptoms as it relearns its adaptive strategy, which may require driving for 16 km (10 mi) or more.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done after removing the bulb for the 2003 Ford Focus? Posted by Customer
    A:
    Installation is achieved by reversing the removal steps.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you do to install the new bulb for the 2005 Ford Focus? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What should be avoided to maintain the fog lamp's performance for the 2005 Ford Focus? Posted by Customer
    A:
    Avoid removing the bulb for an extended period to prevent contaminants from entering.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    Why is it important to wear safety glasses and gloves for the 2004 Ford Focus? Posted by Customer
    A:
    To prevent personal injury during the process.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step in removing the headlamp bulb for the 2007 Ford Focus? Posted by Customer
    A:
    Remove the headlamp bulb protective cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you complete the process of servicing the instrument panel bulb for the 2000 Ford Mustang? Posted by Customer
    A:
    Reverse the removal procedure to install the instrument cluster back in place.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What precautions should be taken when handling the headlamp bulb for the 2005 Ford Focus? Posted by Customer
    A:
    Exercise caution as the bulb contains gas under pressure and may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb carefully by grasping only its base and avoid touching the glass envelope to prevent personal injury.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the warning indicator bulb for the 2007 Ford Focus? Posted by Customer
    A:
    First, remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the first step to service the instrument panel bulb for the 2001 Ford Mustang? Posted by Customer
    A:
    Remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    Why is it important not to remove the bulb until just before installing a new one for the 2007 Ford Focus? Posted by Customer
    A:
    Contaminants can affect performance.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step in servicing the headlamp bulb for the 2000 Ford Mustang? Posted by Customer
    A:
    Begin by removing the headlamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you be aware of when servicing and repairing the headlamp bulb for the 2001 Ford Windstar? Posted by Customer
    A:
    The halogen bulb contains gas under pressure, which may cause it to shatter if the glass envelope is scratched or if the bulb is dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you take out the necessary instrument cluster bulbs for the 2004 Ford Mustang? Posted by Customer
    A:
    Rotate each bulb one quarter turn counterclockwise and lift it straight out of the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What should you do during installation for the 2004 Ford Mustang? Posted by Customer
    A:
    Follow the removal steps in reverse, ensuring to handle the new halogen bulb only by its base and avoiding contact with the glass envelope to prevent damage.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the headlamp bulb for the 2007 Ford Taurus? Posted by Customer
    A:
    Remove the headlamp assembly and disconnect the electrical harness from the headlamp bulb cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    When should the headlamp bulb be removed for the 2000 Ford Windstar? Posted by Customer
    A:
    The bulb should not be removed until just before installing a replacement to prevent performance issues from contaminants entering the headlamp.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you be aware of when servicing the headlamp bulb for the 2001 Ford Mustang? Posted by Customer
    A:
    The halogen bulb contains gas under pressure, which can cause it to shatter if the glass envelope is scratched or if the bulb is dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the proper way to pull the headlamp bulb out for the 2001 Ford Taurus? Posted by Customer
    A:
    Gently pull the headlamp bulb straight out using a gentle up and down rocking motion.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the bulbs from the headlamp for the 2002 Ford Windstar? Posted by Customer
    A:
    Turn the collar counterclockwise one-eighth of a turn and remove it, then turn the seal beam one-eighth of a turn to detach it.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you do when installing the new bulb for the 2006 Ford Taurus? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the headlamp bulb for the 2000 Lincoln Navigator? Posted by Customer
    A:
    Remove the headlamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you do for installation for the 2001 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    How do you install the new bulb for the 2000 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the first step in the removal process for the 2002 Lincoln Navigator? Posted by Customer
    A:
    Begin by removing the headlamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done with the fog lamp bulb before installing a replacement for the 2000 Lincoln Navigator? Posted by Customer
    A:
    The fog lamp bulb should remain in the assembly until just before installing a replacement to prevent contaminants from entering and affecting performance.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the procedure for installation for the 2003 Ford Windstar? Posted by Customer
    A:
    Follow the removal procedure in reverse, ensuring to handle the new bulb with care, grasping it only by its base and avoiding contact with the glass envelope to prevent damage.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you take out the desired miniature bulb for the 2003 Ford Escort? Posted by Customer
    A:
    Turn it a quarter turn counterclockwise and lift it straight up.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the first step to remove the bulb for the 2000 Ford Escort? Posted by Customer
    A:
    Detach the headlamp electrical connector from the headlamp access cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the fog lamp bulb for the 2004 Mercury Sable? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is essential to verify before using new bulbs for the 2000 Mercury Sable? Posted by Customer
    A:
    It is essential to verify that the bulbs meet Ford specifications.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the headlamp bulb retaining ring for the 2004 Mercury Sable? Posted by Customer
    A:
    Rotate the headlamp bulb retaining ring counterclockwise to remove it.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    Why is it important to avoid touching the glass envelope for the 2005 Mercury Sable? Posted by Customer
    A:
    The glass envelope contains gas under pressure and may shatter if scratched or dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step to service and repair the instrument panel bulb for the 2000 Mercury Sable? Posted by Customer
    A:
    Remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the next step after removing the headlamp bulb cover for the 2003 Mercury Sable? Posted by Customer
    A:
    Disconnect the headlamp bulb electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the headlamp bulb cover for the 2005 Mercury Sable? Posted by Customer
    A:
    Rotate the headlamp bulb cover counterclockwise to remove it.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done after removing the instrument cluster for the 2003 Mercury Sable? Posted by Customer
    A:
    Take out the illumination bulbs.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Exterior Bulbs F58Z-13466-CB Designed for Proper Fit and Performance

The Ford part F58Z-13466-CB Exterior Bulbs as a genuine Ford Fog Light Bulb, Headlight Bulb, Instrument Panel Light Bulb component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F58Z-13466-CB Exterior Bulbs is used with Ford Mustang, Explorer, Focus vehicles and Mercury Mountaineer, Sable, Tracer models and Lincoln Navigator, Blackwood models. The original Ford part will bear the manufacturer part number: F58Z-13466-CB and where it is made at Ford. It has the code: 13466.
This component has dimensions of 5.3 x 4.5 x 4.6 inches and its weight is approximately 0.60 Pounds. The part F58Z13466CB is available in New condition while meeting the standards of the product rating. The Bulb; Fog Light Bulb; Fog Light Bulbs; Car Bulbs belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F58Z-13466-CB can be known as Fog Lamp Bulb. The inventory reference for this item is SKU: F58Z-13466-CB. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.