Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
Base, Black Label, L, L Black Label, L Livery, L Luxury, L Reserve, L Select, L Ultimate, Luxury, Premiere, Reserve, Select, Ultimate | 6 Cyl 3.5 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Bulb; Tail Light Bulbs; Car Bulbs; License Lamp Bulb
Base No.: 13466
Item Weight: 0.20 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: F67Z-13466-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln Navigator Submodels:
Base | 8 Cyl 5.4 L GAS
2001 Lincoln Navigator Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln Navigator Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln Navigator Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln Navigator Headlight Bulb Parts Q&A
Q: How to Safely and Correctly Service the Headlight Bulb on 2001 Lincoln Navigator?
A: You must handle the headlamp bulb with extreme caution because the halogen bulb has pressured gas inside which could break if its glass envelope gets scratched or if it drops; keep holding the bulb by its base and refrain from touching the glass section. The headlamp bulb needs to stay in position until the moment before replacement to stop performance problems from foreign objects entering the system. Operating the headlamps is strictly prohibited without a bulb in place. The first step should be to take out the headlamp assembly. Start by turning to the left the headlamp bulb protective cover before taking it off. Unplug the electrical connector from the headlamp bulb and proceed by turning the bulb retainer to the left until removal. One can remove the headlamp bulb through gentle up-and-down rocking motion before pulling it straight out. To install the headlamp assembly position it correctly while inserting the alignment pins onto the pinned holes and ribs of the reinforcement structure.