How Can You Safely Remove and Install an Intake Manifold Without Damaging the Fuel Supply Manifold on 2000 Mercury Mountaineer?

The service and repair of the lower intake manifold starts by removing both the upper intake manifold and the lower intake manifold. Take special precautions because the vehicle uses a composite material to construct the fuel supply manifold and damage can occur if using tools as levers; therefore avoid using them near the manifold. Assess the lower intake manifold gasket for replacement to implement a fresh one if needed. Reversing all procedures used during dismantlement will finish the installation process.

OEM 2000 Mercury Mountaineer Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Intake Manifolds found

View related parts
2000 Mercury Mountaineer Intake Manifold
Part Number: YL2Z-9424-AA
Product Specifications
- Other Name: Manifold Assembly - Inlet; Manifold
- Base No.: 9424
- Item Weight: 1.40 Pounds
- Item Dimensions: 15.7 x 8.1 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL2Z-9424-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Mountaineer Submodels:
- Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
2000 Mercury Mountaineer Intake Manifold
Part Number: XL2Z-9424-CA
Product Specifications
- Other Name: Manifold Assembly - Inlet; Manifold
- Manufacturer Note: Upper. Includes 9E926 Throttle Body. Includes mounting screws W705464-S309., SOHC
- Base No.: 9424
- Item Weight: 9.40 Pounds
- Item Dimensions: 19.9 x 7.1 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-9424-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Mountaineer Submodels:
- Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
2000 Mercury Mountaineer Intake Manifold, Upper
Part Number: XL2Z-9424-BA
Product Specifications
- Other Name: Manifold Assembly - Inlet; Manifold
- Manufacturer Note: Upper - Includes 9J459 EGR Control & 9J460 Sensor, For external type EGR
- Position: Upper
- Base No.: 9424
- Item Dimensions: 19.1 x 12.7 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-9424-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Mercury Mountaineer Submodels:
- Base | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

2000 Mercury Mountaineer Intake Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Mountaineer Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Mountaineer Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Mercury Mountaineer Intake Manifold Parts Questions & Experts Answers

Q: How Can You Safely Remove and Install an Intake Manifold Without Damaging the Fuel Supply Manifold on 2000 Mercury Mountaineer?
A: The service and repair of the lower intake manifold starts by removing both the upper intake manifold and the lower intake manifold. Take special precautions because the vehicle uses a composite material to construct the fuel supply manifold and damage can occur if using tools as levers; therefore avoid using them near the manifold. Assess the lower intake manifold gasket for replacement to implement a fresh one if needed. Reversing all procedures used during dismantlement will finish the installation process.