FordParts
My Garage
My Account
Cart
OEM 2000 Mercury Mystique A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Condenser found
2000 Mercury Mystique Condenser Part Number: XW2Z-19712-AA
Product Specifications- Other Name: Condenser Assembly; A/C Condenser
- Manufacturer Note: w/integral A/C
- Base No.: 19712
- Item Weight: 8.90 Pounds
- Item Dimensions: 2.1 x 16.2 x 28.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW2Z-19712-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Mystique A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Mystique A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Mystique A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Mercury Mystique A/C Condenser Parts Q&A
- Q: How to Service and Repair an A/C Condenser on 2000 Mercury Mystique?A: Analysts should start HVAC condenser maintenance by executing the Refrigerant Discharging and Recovery Procedure. Use left-hand side pins to support the radiator then lift the vehicle into position. Secure the radiator splash shield before performing the procedure to ensure all lines and connections remain sealed through the use of plugs. Extract the air conditioning condenser from the radiator crossmember after disconnecting its upper and lower lines from the condenser. Detach the right along with left-hand side radiator brackets while keeping the radiator fins free from damage. Push the radiator towards the compressor to its maximum while simultaneously detaching the condenser top mountings to perform the removal. The installation process requires reversing the previous steps of removal and a check of normal A/C system operation should be performed. New O-rings need application of refrigerant oil before installation to achieve correct sealing performance and operational functionality.