FordParts
My Garage
My Account
Cart
OEM 2000 Mercury Sable Motor And Transmission Mount
Motor and Trans Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Motor And Transmission Mounts found
2000 Mercury Sable Rear Mount Part Number: 4F1Z-6068-BA
$61.09 MSRP: $84.52You Save: $23.43 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Insulator Assembly - Engine Support; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Position: Rear
- Replaces: YF1Z-6068-AA
- Base No.: 6068
- Item Weight: 2.80 Pounds
- Item Dimensions: 6.1 x 3.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Sable Front Mount Part Number: YF1Z-6038-AA
Product Specifications- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Base No.: 6038
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Sable Transmission Mount, Rear Part Number: 3F1Z-6F063-AA
Product Specifications- Other Name: Insulator Assembly; Automatic Transmission Mount; Engine Mount Torque Strut; Bracket; Transfer Case Mount; Motor Mount; Rear Insulator
- Position: Rear
- Replaces: YF1Z-6F063-AA
- Base No.: 6F063
- Item Weight: 4.10 Pounds
- Item Dimensions: 6.2 x 4.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-6F063-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Sable Rear Mount Part Number: YF1Z-6068-AB
Product Specifications- Other Name: Insulator; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Position: Rear
- Replaces: 4F1Z-6068-AA, F6DZ-6068-A
- Base No.: 6068
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.4 x 10.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-6068-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Sable Motor And Transmission Mount
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Sable Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Sable Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Mercury Sable Motor And Transmission Mount Parts Q&A
- Q: How to Service and Repair the Motor and Transmission Mount on 2000 Mercury Sable?A: Service and repair of the transmission mount begins by disconnecting the battery ground cable followed by vehicle elevation. Set a High Lift Transmission Jack beneath the transaxle before you take away the left tire and wheel. Engine elevation should be limited to prevent overstretching the tripod CV joint because excessive tension could split its internal parts and trigger halfshaft failure. A transmission support insulator can be dismounted after properly raising the transaxle. First remove the engine and transaxle support insulator securing bolts after detaching the support insulator by raising the transaxle. Begin by obtaining the rear engine support bracket by removing both its bolts and its bracket. The first step for installation requires attaching the rear engine support bracket followed by bolt installation. The engine and transaxle support insulator should be installed next followed by loosely secured bolts while lowering the transaxle before complete bolt tightening. Reinstall the left-hand wheel together with its tire when the High Lift Transmission Jack is removed and the vehicle should be lowered afterward before reconnecting the battery ground cable.