How to Service and Repair the Motor And Transmission Mount for the 4F50N Transaxle Support Insulator on a 3.0L 4V Engine on Mercury Sable?

Start by lifting the vehicle and taking off the left wheel combined with the tire to service or fix the transmission mount for the 4F50N transaxle support insulator installed on 3.0L 4V engine vehicles. Start the process by resting a high lift transmission jack under the transaxle before removing the engine and transaxle upper support insulator nut. After that, disconnect and take off the upper support bucket bolts and bucket along with the insulator. The second step involves extracting both bolts from the upper insulator support along with the insulator itself. Begin the installation process by placing the engine and transaxle support insulator and then fasten it using bolts. Fasten the upper support bracket to its place by using all bolts followed by replacement of the insulator nut. After dismantling the high lift transmission jack you should install the left-wheel along with its tire before lowering the vehicle.

OEM Mercury Sable Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Motor And Transmission Mounts found

View related parts
Mercury Sable Transmission Mount, Front Upper Part Number: DG1Z-6038-F
$66.30 MSRP: $96.50
You Save: $30.20 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Automatic Transmission Mount, Front Upper; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Upper Trans Mount
- Position: Front Upper
- Replaces: DG1Z-6038-D, 8G1Z-6038-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Mount Bracket, Front Passenger Side Part Number: 8M8Z-6038-A
$63.73 MSRP: $97.90
You Save: $34.17 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Front Engine Mount Support; Right Engine Mount Bracket; Torque Strut; Motor Mount.; Engine Bracket; Front Mount; Front Mount Bracket; Support; Mount
- Manufacturer Note: Bracket
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Mount Part Number: 8G1Z-6038-A
$76.38 MSRP: $111.18
You Save: $34.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Insulator
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Torsion Arm, Lower Part Number: 9G1Z-6068-A
$42.16 MSRP: $61.37
You Save: $19.21 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing; Automatic Transmission Mount, Lower; Engine Support Rod; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Lower Mount; Lower Trans Mount; Transmission Mount
- Position: Lower
- Replaces: 8G1Z-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Mount Part Number: F7DZ-6038-AA
$160.33 MSRP: $221.79
You Save: $61.46 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Manufacturer Note: 12V
- Replaces: F6DZ-6038-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Mount Bracket, Upper Part Number: 8G1Z-6031-A
$51.90 MSRP: $74.25
You Save: $22.35 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Automatic Transmission Mount; Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Transmission Mount
- Position: Upper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Mercury Sable | Base, Premier | 6 Cyl 3.5 L GAS
View related parts
Mercury Sable Front Mount, Driver Side Part Number: F6DZ-6038-C
$51.89 MSRP: $71.78
You Save: $19.89 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Motor Mount; Front Bracket; Front Insulator; Mount Insulator; Mount
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Mount Part Number: F4DZ-6038-A
$29.75 MSRP: $41.16
You Save: $11.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Mount Part Number: F6DZ-6068-C
$11.89 MSRP: $16.45
You Save: $4.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Bracket; Motor Mount; Rear Support; Rear Bracket; Mount; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Front Mount Part Number: F7DZ-6038-BA
$150.06 MSRP: $204.21
You Save: $54.15 (27%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Mount Part Number: F4DZ-6068-C
$110.46 MSRP: $150.31
You Save: $39.85 (27%)
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Motor Mount; Rear Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Mercury Sable | GS, LS, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Transmission Mount Part Number: F6DZ-6F063-A
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Rear Insulator
- Replaces: F5DZ-6F063-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1999 Mercury Sable | G, GS, LS, LS Premium, LTS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: YF1Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Front; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator; Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Mercury Sable | GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: E8DZ6038B
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Oil Pump Part Number: E8DZ-6F063-B
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Transmission Mount; Motor Mount; Support Bracket; Front Mount; Overhaul Gasket Set
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Transmission Mount Part Number: F5DZ-6F063-C
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Support Bracket; Front Mount; Bracket; Insulator
- Manufacturer Note: exc. P/C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1995 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
Mercury Sable Rear Mount Part Number: F7DZ-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Motor Mount; Isolator; Insulator Assembly - Engine Support
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Mercury Sable | G, GS, LS, LS Premium | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: F8DZ-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Rear Mount Part Number: YF1Z-6068-AB
Product Specifications
- Other Name: Insulator; Engine Mount, Rear; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Isolator
- Position: Rear
- Replaces: 4F1Z-6068-AA, F6DZ-6068-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2005 Mercury Sable | G, GS, LS, LS Premium, Platinum Edition | 6 Cyl 3.0 L GAS
View related parts
Mercury Sable Front Mount Part Number: F8DZ-6038-BA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Motor Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993 Mercury Sable | GS, LS | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Mercury Sable Motor And Transmission Mount

OEM Motor And Transmission Mount boasts unmatched quality. Each part goes through full quality checks. They adhere to Mercury's official factory standards. These steps remove flaws and inconsistencies. So you can get Motor And Transmission Mount with long life and a perfect fit. Come to our website and find genuine Mercury Sable parts. We keep a wide inventory of OEM Sable parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Motor And Transmission Mount is one of the key assemblies of the car that can be seen defining the Mercury Sable specifications in respect to its reliability and performance. This Motor And Transmission Mount is specifically intended to firmly secure the transmission and thereby camouflage it from the reverberations of the motor, to enhance the stability of the motor and facilitate a more efficient driving. With regards to compatibility, it goes with various generations of Sable models, which presents its relevance when it comes to preserving the drivetrain of the vehicle. The principal function of the Motor And Transmission Mount is to contribute to the increase of efficiency and reduction of noise and vibrations, interfering with the vehicle stability and smooth driving. In its many years of production, the Mercury Sable has consistently displayed performance enhancements for its motor and transmission mount, and the Mercury Sable motor and transmission mount shown herein comprise advanced materials and designs in the fabrication of an improved and sturdier mount. It is one of the strengths of this component in the automotive market because of the manner in which it can be configured to the transmission envelope across the entire range of the Sable series. Since Mercury Sable is known for its reliability, the Motor And Transmission Mount is indispensable for Sable owner who wants to keep their auto in a good shape. In conclusion, Motor And Transmission Mount is not only an element that is considered to be as a part of car, but it can be viewed as substantial thing that can improve driving and which for this reason can be noted as relevant addition to Mercury Sable development.

Mercury Sable Motor And Transmission Mount Parts and Q&A

Front Mount
YF1Z-6038-AA
Q: How to Service and Repair the Motor And Transmission Mount for the 4F50N Transaxle Support Insulator on a 3.0L 4V Engine on Mercury Sable?
A:
Start by lifting the vehicle and taking off the left wheel combined with the tire to service or fix the transmission mount for the 4F50N transaxle support insulator installed on 3.0L 4V engine vehicles. Start the process by resting a high lift transmission jack under the transaxle before removing the engine and transaxle upper support insulator nut. After that, disconnect and take off the upper support bucket bolts and bucket along with the insulator. The second step involves extracting both bolts from the upper insulator support along with the insulator itself. Begin the installation process by placing the engine and transaxle support insulator and then fasten it using bolts. Fasten the upper support bracket to its place by using all bolts followed by replacement of the insulator nut. After dismantling the high lift transmission jack you should install the left-wheel along with its tire before lowering the vehicle.