FordParts
My Garage
My Account
Cart
OEM 2001 Ford E-150 Econoline Brake Disc
Disc Rotor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Discs found
2001 Ford E-150 Econoline Hub & Rotor, Front Part Number: YC2Z-1V102-A
$82.86 MSRP: $124.98You Save: $42.12 (34%)Product Specifications- Other Name: Hub And Disc Assembly; Front Disc Brake Rotor and Hub Assembly; Wheel Hub Repair Kit.; Rotor
- Position: Front
- Replaces: F4UZ-1102-A, BRR-16, YC2Z-1V102-FA
- Base No.: 1V102
- Item Weight: 57.30 Pounds
- Item Dimensions: 7.2 x 13.5 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC2Z-1V102-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford E-150 Econoline Hub & Rotor Part Number: YL3Z-1V102-G
Product Specifications- Other Name: Hub And Disc Assembly; Rotor
- Replaces: F4UZ-1102-B, YL3Z-1V102-BA, YL3Z-1V102-C, BRR-201, BRR-26
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-1V102-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford E-150 Econoline Brake Disc
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-150 Econoline Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-150 Econoline Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford E-150 Econoline Brake Disc Parts Q&A
- Q: How to Service and Repair the Brake Disc on 2001 Ford E-150 Econoline?A: Start brake rotor/disc repair and servicing of the E-150 by first removing the brake pads. You must first remove the brake disc and hub through the process of taking away the hub grease cap and cotter pin followed by the removal of the nut retainer together with the spindle nut and front wheel outer bearing retainer washer and outer front wheel bearing before you can take off the brake disc and hub. A brake disc machining process should be performed on vehicles by following the lathe manufacturer's instructions while also removing the wheel hub grease seal and the inner front wheel bearing. The front wheel bearings and brake disc and hub need inspection using the F3AZ-19579-SA Metal Brake Parts Cleaner F3AZ-19579-SA or a product of equal effectiveness for cleaning before installation. Front wheel bearings require Premium Long-Life Grease XG-I-C or -K or an equivalent which satisfies Ford specification ESA-MIC75-B. The procedure starts with installing one wheel hub grease seal followed by the inner front wheel bearing and another wheel hub grease seal. First position the brake disc with the hub and then add the outer front wheel bearing and front wheel outer bearing retainer washer and finally install the spindle nut. The spindle nut requires tightening as the brake disc and hub are rotated before the technician loosens it by two turns. Perform three tightens of the spindle nut and three corresponding loosens when the brake disc and hub are being rotated. As the final step, install the brake pads throughout this procedure.