How to service and repair the rear shock absorber with axles on 2001 Ford Excursion?

The repair of Super Duty F-250 and F-350 rear shock absorbers on Ford axle-equipped vehicles needs one to first securely raise and support the vehicle. A suitable automotive jack should hold the rear axle before you remove the shock absorber lower retaining nut and bolt. To service the shock absorber on F-Super Duty vehicles start by removing the mounting bracket nut from the upper section. During service or repair of Excursion shock absorbers the two upper mounting bolts should be taken out. The shock absorber installation ends with new hardware and proceeding through the backward removal steps to set the new shock absorber. Proper retention of new components requires using identical part numbers or equivalent parts together with following the torque specifications during reassembly. Pay attention to the nitrogen gas contained in low-pressure gas shock absorbers because opening or puncturing the units or exposing them to heat is strictly prohibited.

OEM 2001 Ford Excursion Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shock Absorbers found

View related parts
2001 Ford Excursion Shock Absorber, Front
Part Number: AU2Z-18V124-AV
$36.27 MSRP: $50.18
You Save: $13.91 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 2C7Z-18124-EA, ASH-707, 3U2Z-18124-BW
- Base No.: 18124
- Item Weight: 4.40 Pounds
- Item Dimensions: 4.5 x 3.5 x 27.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-AV
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Front
Part Number: AU2Z-18V124-BL
$48.07 MSRP: $80.55
You Save: $32.48 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: ASH-391, 2C7Z-18124-BA, 3U2Z-18124-FAA
- Base No.: 18V124
- Item Weight: 6.10 Pounds
- Item Dimensions: 26.8 x 3.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-BL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Rear
Part Number: 6U2Z-18V125-A
$43.28 MSRP: $58.90
You Save: $15.62 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock; Suspension Shock Absorber
- Manufacturer Note: Shock kit - includes attaching hardware, 4X4 - Replace in pairs
- Position: Rear
- Replaces: YC3Z-18125-AB, YC3Z-18125-AC
- Base No.: 18V125
- Item Weight: 5.80 Pounds
- Item Dimensions: 27.0 x 3.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6U2Z-18V125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Limited, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Front
Part Number: AU2Z-18V124-AQ
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 3U2Z-18124-JAA, ASH-706, ASH-394, 2C7Z-18124-DA, 3U2Z-18124-BV
- Base No.: 18124
- Item Weight: 4.30 Pounds
- Item Dimensions: 4.7 x 3.6 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-AQ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Rear
Part Number: BU2Z-18V125-L
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: ASH-120, YC3Z-18125-AA, 2C7Z-18125-AA
- Base No.: 18125
- Item Weight: 7.20 Pounds
- Item Dimensions: 4.7 x 3.6 x 27.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Front
Part Number: AU2Z-18V124-BK
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 3U2Z-18124-CDD, ASH-723
- Base No.: 18124
- Item Weight: 6.00 Pounds
- Item Dimensions: 28.1 x 3.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-BK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Excursion Shock Absorber, Rear
Part Number: BU2Z-18V125-M
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: 2C7Z-18125-CA, ASH-121, YC3Z-18125-CA
- Base No.: 18125
- Item Weight: 6.10 Pounds
- Item Dimensions: 27.8 x 3.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-M
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2001 Ford Excursion Shock Absorber, Rear
Part Number: 6U2Z-18V125-B
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock; Suspension Shock Absorber
- Manufacturer Note: Shock kit - includes attaching hardware, 4X2 - replace in pairs
- Position: Rear
- Base No.: 18125
- Item Weight: 5.90 Pounds
- Item Dimensions: 26.5 x 3.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6U2Z-18V125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Limited, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL

2001 Ford Excursion Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Excursion Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Excursion Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Excursion Shock Absorber Parts Questions & Experts Answers

Q: How to service and repair the rear shock absorber with axles on 2001 Ford Excursion?
A: The repair of Super Duty F-250 and F-350 rear shock absorbers on Ford axle-equipped vehicles needs one to first securely raise and support the vehicle. A suitable automotive jack should hold the rear axle before you remove the shock absorber lower retaining nut and bolt. To service the shock absorber on F-Super Duty vehicles start by removing the mounting bracket nut from the upper section. During service or repair of Excursion shock absorbers the two upper mounting bolts should be taken out. The shock absorber installation ends with new hardware and proceeding through the backward removal steps to set the new shock absorber. Proper retention of new components requires using identical part numbers or equivalent parts together with following the torque specifications during reassembly. Pay attention to the nitrogen gas contained in low-pressure gas shock absorbers because opening or puncturing the units or exposing them to heat is strictly prohibited.