How to service and repair the vacuum brake booster on 2001 Ford Explorer?

The first step to repair the vacuum brake booster includes removing the brake master cylinder followed by disconnecting the power brake booster hose after compressing its clamp. Begin by disconnecting the brake pedal from the power brake booster push rod through removal of its self-locking pin. Then remove the stoplight switch along with the brake booster push rod from the brake pedal pin followed by removing the brake booster push rod bushing. Remove the bulkhead sound insulator first then support the power brake booster before extracting it by unfastening its nuts. Users should perform installation by executing the removal steps in reverse order.

OEM 2001 Ford Explorer Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2001 Ford Explorer Brake Booster Part Number: 5L2Z-2005-B
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: 1L5Z-2005-AA, XL2Z-2005-AA
- Base No.: 2005
- Item Weight: 12.70 Pounds
- Item Dimensions: 11.1 x 11.2 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-2005-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

2001 Ford Explorer Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Explorer Brake Booster Parts Q&A

Q: How to service and repair the vacuum brake booster on 2001 Ford Explorer?
A: The first step to repair the vacuum brake booster includes removing the brake master cylinder followed by disconnecting the power brake booster hose after compressing its clamp. Begin by disconnecting the brake pedal from the power brake booster push rod through removal of its self-locking pin. Then remove the stoplight switch along with the brake booster push rod from the brake pedal pin followed by removing the brake booster push rod bushing. Remove the bulkhead sound insulator first then support the power brake booster before extracting it by unfastening its nuts. Users should perform installation by executing the removal steps in reverse order.