How to service and repair the Hood Cable on 2001 Ford Explorer?

You must detach the hood latch before working on the hood cable. Start by unclipping the hood latch control handle and cable retainer from the inside fender splash shield after which you should put these components aside. First disconnect the hood latch control handle along with the cable by removing its two retaining screws before placing these components out of the way. The next step involves evacuating the hood latch control and cable grommet from the dash panel before taking out the hood latch control handle and cable. The installation requires the opposite steps used during removal in order to finish the process.

OEM 2001 Ford Explorer Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2001 Ford Explorer Release Cable, Front Part Number: 1L5Z-16916-AA
$81.82 MSRP: $119.10
You Save: $37.28 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control; Hood Release Cable, Front; Hood Release Cable
- Position: Front
- Replaces: F87Z-16916-BA
- Base No.: 16916
- Item Weight: 1.20 Pounds
- Item Dimensions: 12.2 x 6.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-16916-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
View related parts
2001 Ford Explorer Release Cable, Front Part Number: F87Z-16916-AA
Product Specifications
- Other Name: Cable Assembly - Hood Control; Hood Release Cable, Front; Hood Release Cable
- Manufacturer Note: Cable & handle asy
- Position: Front
- Replaces: F77Z-16916-BB
- Base No.: 16916
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.5 x 10.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-16916-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Limited, Postal, Sport, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS

2001 Ford Explorer Hood Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Hood Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Hood Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Explorer Hood Cable Parts Q&A

Q: How to service and repair the Hood Cable on 2001 Ford Explorer?
A: You must detach the hood latch before working on the hood cable. Start by unclipping the hood latch control handle and cable retainer from the inside fender splash shield after which you should put these components aside. First disconnect the hood latch control handle along with the cable by removing its two retaining screws before placing these components out of the way. The next step involves evacuating the hood latch control and cable grommet from the dash panel before taking out the hood latch control handle and cable. The installation requires the opposite steps used during removal in order to finish the process.